MEASURING INSTRUMENTS CATALOG No.E2019
538/608

L-7LSurftestPerforms brilliantly in many situations such as in the quality control room, on the factory oor and on the production line. Mitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Surftest Extreme SV-3000CNC/SV-M3000CNCSERIES 178 — CNC Surface Roughness Testers• The X1, Y and Z2 axes have a maximum drive speed of 200 mm/s. This permits high-speed positioning that can potentially result in a large increase in the throughput of multiple-profile/multiple-workpiece measurement tasks.• Capable of inclined plane measurement through 2 axis simultaneous control in X and Y.• For models equipped with the α axis, it is possible to perform continuous measurement over horizontal and inclined surfaces by power-tilting the drive unit.• It is possible to expand the measuring range for multiple workpieces through positioning in Y.• All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.• Since the Z1-axis detector incorporates an anti-collision safety device, the detector unit will automatically stop if it touches a workpiece or fixture.• Surftest Extreme SV-M3000CNC (CNC Surface Roughness Tester with a movable Y-axis table) that handles measurement of large/heavy workpieces, such as engine blocks or crankshafts, is also available.• Optional external control function (Ext I/O) through bidirectional communication (RS-232C) with the PLC (programmable logic controller) is available. SV-3000CNC SPECIFICATIONSSV-M3000CNC SPECIFICATIONSRefer to the CNC Form Measuring Instrument Series Brochure (No. E4284) for more details.SV-M3000CNC(Surface Roughness Tester with built-in Y axis.)(The photo represents a special specification model.)SV-3000CNC(Inclinable drive unit + Y-axis table)Model No.SV-3000CNC X1 axis (drive unit)Measuring range200 mmResolution0.05 µmScale typeReflective-type linear encoderDrive speedCNC modeMax. 200 mm/sJoystick mode0 to 50 mm/sMeasuring speed0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0 mm/sMeasuring directionBackward Straightness0.5 µm/200 mmY axis (table)Measuring range200 mmResolution0.05 µmDrive speedCNC modeMax. 200 mm/sJoystick mode0 to 50 mm/sMaximum table loading20 kgZ2 axis (column)Travel rangeZ2 axis (column, type S)300 mmZ2 axis (column, type H)500 mmResolution0.05 µmScale typeReflective-type linear encoderDrive speedCNC modeMax. 200 mm/sJoystick mode0 to 50 mm/sBase unitBase size (width×depth)750×600 mmBase materialGabbroNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.Model No.SV-M3000CNC X1 axis (drive unit)Measuring range200 mmResolution0.05 µmScale typeReflective-type linear encoderDrive speedCNC modeMax. 200 mm/sJoystick mode0 to 50 mm/sMeasuring speed0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0 mm/sStraightnessWhen using a standard detector0.5 µm/200 mmZ2 axis (column)Measuring range500 mmResolution0.05 µmScale typeReflective-type linear encoderDrive speedCNC modeMax. 200 mm/sJoystick mode0 to 50 mm/sY axisMeasuring range800 mmResolution0.05 µmScale typeReflective-type linear encoderDrive speedCNC modeMax. 200 mm/sJoystick mode0 to 50 mm/sMeasuring speed0.02 to 2 mm/sStraightnessWhen using a standard detector holderNarrow range0.5 µm/50 mmWide range2 µm/800 mmBase unitBase size (width×depth)600×1500 mmBase materialSteelMaximum table loading300 kgAn inspection certicate is supplied as standard. Refer to page U-11 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).

元のページ  ../index.html#538

このブックを見る