MEASURING INSTRUMENTS CATALOG No.E2019
503/608

J-4JMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.•Floor-standing projector with a vertical axis and a unique forward-sloping screen.•The large 500 mm diameter screen enables the whole of a 100 mm diameter workpiece to be inspected using a 5X projection lens without needing to move the workpiece.•Standard models as used in the machine tool industry. Best for observation and measurement of cutting tools (end mills, lathe tools).•The stage has a higher loading capacity (45 kg) than any other type of projector. Refer to the Measuring Projector Brochure (No. E14005) for more details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).PV-5110SERIES 304 — Profile Projectors•The sloping screen design enables the operator to maintain a comfortable operational posture for long periods of time while making comparative measurements or tracing a projected image.•For data processing, a 2D data processor QM-Data200 is available.SPECIFICATIONSModel No.PV-5110Order No. 304-919*1Projected imageInverted-reversedProtractor screenEffective diameterø508 mm (20 in)Screen materialFine-ground glassScreen rotation±360° (±370° for display)Angle displayDigital counter (LED) (ABS/INC mode switching, Zero Set)Resolution1’ or 0.01° (switchable)MechanismFine feed and clampCross-hairs90° (solid lines)Zero-base index(Equipped with the built-in backlight)Projection lensMagnification10X (standard accessory), 5X, 20X, 50X, 100XLens mountQuick insertion typeIlluminationTransmitted illuminationHalogen bulb (24 V, 150 W, 500 hours) (512305), Telecentric system, Heat-absorbing filter, Built-in cooling fan, 2-step (High/Low) brightness switch, Combination use with a color filter availableSurface illuminationDouble-lighting oblique surface illumination unit (Optional),Halogen bulb (24 V, 150 W, 500 hours) (512305), 2-step (High/Low) brightness switchResolution for X/Y counter *2—Measuring unitDigital scaleMeasuring range (X×Y)200×100 mm (164×68 mm*3)*1 To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, C and No suffix is required for PSE.*2 X and Y counters are not built into the PV-5110 main unit. If a counter display is required, it is recommended that a QM-Data200 or KA-212 is purchased separately.*3 The range where no shading is observed using a 5X projection lens with transmitted illumination.PV-5110PH-3515F, PH-A14SERIES 172 — Profile Projector•Unique projector employing horizontal optical system. The optical axis and the stage are parallel, and the workpiece can be easily removed.•For data processing, a 2D data processor QM-Data200 is available.SPECIFICATIONSModel No.PH-3515FPH-A14Order No. 172-868*1 172-810*2Projected imageErect-reversedInverted-reversedProtractor screenEffective diameterø353 mm (13.9 in)ø356 mm (14 in)Screen materialFine-ground glassScreen rotation±360° (±370° for display)Angle displayDigital counter (LED) (ABS/INC mode switching), Zero SetVernierResolution1’ or 0.01° (switchable)2’ (graduation)MechanismFine feed and clampCross-hairs90° (solid lines)Projection lensMagnification10X (standard accessory), 5X(PH-3515F only), 20X, 50X, 100XLens mountScrew mountMagnification accuracyTransmitted illuminationWithin ±0.1 % of nominal magnificationSurface illumination Within ±0.15 % of nominal magnificationIllumination*3Transmitted illuminationHalogen bulb (24 V, 150 W, 50 hours) (515530), Telecentric system, Heat-absorbing filter, Built-in cooling fan, 2-step (High/Low) brightness switch, Combination use with a color filter availableSurface illumination (oblique)Parabolic halogen bulb (24 V, 200 W, 500 hours) (12BAA637)Beam concentration and adjustment available, Heat-absorbing filter, Built-in cooling fanResolution for X/Y counter *4—Measuring unitDigital scaleMeasuring range (X×Y)254×152 mm200×100 mm*1 To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, C and No suffix is required for PSE.*2 To denote your AC power cable add the following suffixes to the order No.: -10A for UL/CSA, -20D for CEE, -20DC for CCC, -20E for BS, -20K for KC.*3 For the PH-A14, a light source (24 V, 150 W), which is common to the Transmitted illumination and Surface illumination, is used. It is not possible to regulate brightness.*4 XY counter is not built in the main unit of the PH-3515F or PH-A14. If a counter display is required, it is recommended to purchase the QM-Data200 or a counter (KA-212) separately.Note: Depending on the angle of illumination, measurement results may be smaller than actual values.PH-3515FPH-A14

元のページ  ../index.html#503

このブックを見る