MEASURING INSTRUMENTS CATALOG No.E2019
349/608

F-10FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Lug 21EZA145 (ISO/JIS type) 21EZA146 (ASME/ANSI/AGD type)• Arm for ID-B (made-to-order)• Rubber boot For oil resistance (NBR) 02ACA376 (for ID-N) 125317 (for ID-B) For durability (silicon) 238774 (for ID-N) 21EAA212 (for ID-B)• SPC cable: 21EAA194 (1 m) 21EAA190 (2 m)• USB Input Tool Direct (2 m): 06AFM380G• Input Tool Series IT-016U (USB Keyboard Signal Conversion Type): 264-016-10 IT-007R (RS-232C Communication Conversion Type): 264-007 Refer to page F-66 for details.• Connecting Cables for U-WAVE-T (160 mm): 02AZD790G For foot switch: 02AZE140G Refer to page F-66 for details.• Digimatic Mini-Processor DP-1VA LOGGER: 264-505• Bifurcated connecting cable with zero-setting terminal: 21EAA210 (1 m) 21EAA211 (2 m)Two of the wires inside the cable are separated for zerosetting without touching the SET switch on the main body.Use these wires in combination with commercially availableswitches. Zero setting is performed by briey connectingthese two wires together (less than a second), and ABSpreset & recall by connecting for a second or more.• Contact points for Mitutoyo’s dial indicators. (Refer to pages F-57 to F-60 for details.)Using the lifting knobLifting knobFunctions• Zero-setting (INC system)• Presetting (ABS system)• Direction switching• Tolerance judgment• LCD readout reversal• Resolution switching (For 0.001 mm or 0.00005 inch resolution models)• Data output• Display value holding (when no external device is connected)• Low battery voltage alarm display• Error alarm displayOptional Accessories• Lifting knob (only for ID-N) 21EZA105 (ISO/JIS type) 21EZA150 (ASME/ANSI/AGD type)Spindle can be manually lifted. Remove the spindle cap for ID-N and attach the lifting knob to the spindle. Note that water resistance is not maintained in this conguration.ABSOLUTE Digimatic Indicator ID-N/BSERIES 543 —with Dust/Water Protection Conforming to IP66• Our unique ABS scale restores the last origin position automatically when the indicator is turned on. • The chance of overspeed errors has been eliminated thanks to the ABS scale.• Rated to IP66: can be used satisfactorily even in adverse environments where the indicator is subject to splashing by cutting uid or coolant. • Slim body design (body width: only 35 mm) is advantageous in multipoint measurement situations where space is restricted. The LCD readout can also be rotated 180° to allow reading from the most convenient direction. • Succeeded in digitalization of the Back Plunger type widely used for dial indicators for ID-B. A 5 mm-stroke plunger with a higher degree of accuracy has been implemented by adopting a direct reading scale for plunger displacement.• Tolerance judgment can be performed by setting upper and lower tolerance limits. The judgment result (go/no-go) can be displayed in full-size characters. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems (refer to page A-3).LCD readout reversal function* Quantizing error of ±1 count is excludedRated to IP66 water- and dust-proong standard and oil resistance improved. Body width 35 mmDigimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.SPECIFICATIONSMetricOrder No.Range (mm)Resolution (mm)Accuracy* (mm)Remarks543-57012.70.010.02Slim type ID-N543-5805.0Back Plunger type ID-B543-57512.70.01/0.0010.01/0.003Slim type ID-N543-5855.0Back Plunger type ID-BInch/MetricOrder No.Range (in)ResolutionAccuracy* (in)Remarks543-5710.50.0005 in, 0.01 mm0.001Slim type ID-N543-5810.2Back Plunger type ID-B543-5760.50.01 mm/0.001 mm 0.0005 in/0.00005 in0.00012Slim type ID-N543-5860.2Back Plunger type ID-B543-575543-585Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details). ISO/JIS type ASME/ANSI/AGD typeBifurcated connecting cable with zero-setting terminalSPC cable

元のページ  ../index.html#349

このブックを見る