L-10LMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Surftest SV-3200SERIES 178 — Desktop Surface Roughness TesterSPECIFICATIONSEquipped to measure a variety of parameters.A precision surface roughness tester supported by a wide range of optional accessories for a versatile benchtop surface-analysis solution.• The analysis unit is equipped with the FORMTRACEPAK Surface Roughness / Contour analysis program.• High-resolution type Z1-axis detector is provided as standard. The highest display resolution of the Z1 axis is 0.0001µm (when the measuring range is 8µm.)• X-axis drive unit is equipped with a built-in high-precision glass scale to achieve the highly accurate positioning for the travel direction (X axis). SV-3200 series employs a ceramic guide for the drive unit to enhance resistance to abrasion for a long service life.• The resolution of the X axis is 0.05µm.• Detectors with standard or low measuring force, 4mN or 0.75mN, are selectable whether the instrument is equipped with the inclinable drive unit or not.• The 700mm Z2-axis (column) range models are new to the lineup.Model No.SV-3200S4SV-3200H4SV-3200W4SV-3200L4SV-3200S8SV-3200H8SV-3200W8SV-3200L8Measuring range/ResolutionZ1 axis800µm/0.01µm, 80µm/0.001µm, 8µm/0.0001µmTravel range of the X axis100mm200mmDrive unitX-axis straightness(0.05+0.001L)µm (L: Measuring length (mm))(0.1+0.002L)µm (L: Measuring length (mm))Measuring speed0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 5.0, 10, 20mm/sZ2 axis (column)300mm (motorized)*1500mm (motorized)*1700mm (motorized)*1300mm (motorized)*1500mm (motorized)*1700mm (motorized)*1Assessed prolePrimary prole, Roughness prole, Waviness prole, Filtered waviness prole, Rolling circle waviness prole, Rolling circle center line waviness proleEnvelope residual prole, DIN4776 prole, Roughness motif prole, Waviness motif proleParameterPa, Pq, Psk, Pku, Pp, Pv, Pz, Pt, Pc, PSm, P∆q, Pm (rc), Pmr, Pδc, Ra, Rq, Rsk, Rku, Rp, Rv, Rz, Rt, Rc, RSm, R∆q, Rm (rc), Rmr, Rδc, Wa, Wq, Wsk, Wku, Wp, Wv, Wz, Wt, Wc, WSm, W∆q, Wm (rc), Wmr, Wδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Rx, AR, R, Wx, AW, W, Wte, Ry, RyDIN, RzDIN, R3y, R3z, S, HSC, Lo, lr, ∆a, λa, λq, Vo, Htp, NR, NCRX, CPM, SR, SAR, NW, SW, SAWAnalysis graphADC, BAC, Power spectrum chart, Auto-correlation chart, Walsh power spectrum chart, Walsh auto-correlation chart, Slope distribution chart, Local peak distribution chart, Parameter distribution chartData compensation functionsTilt compensation (General/First half/Second half/Anchor/Arbitrary), R-surface compensation, Ellipse compensation, Parabola compensation, Hyperbolic compensation, Conic compensation, Polynomial compensationFilterGaussian, 2CR75, 2CR50, 2CRPC75, 2CRPC50, Robust-SplineCutoff valueλs0.0008, 0.0025, 0.008, 0.025, 0.08, 0.25, 0.8mmλc0.025, 0.08, 0.25, 0.8, 2.5, 8, 25mm, arbitrary (0.025 to 50mm)λf0.08, 0.25, 0.8, 2.5, 8, 25, 80mm, arbitrary (0.025 to 50mm)λh0.025, 0.08, 0.25, 0.8, 2.5, 8mm, arbitrary (0.025 to 50mm)λl0.08, 0.25, 0.8, 2.5, 8, 25mm, arbitrary (0.025 to 50mm)Sampling length0.025, 0.08, 0.25, 0.8, 2.5, 8, 25mm, arbitrary (0.025 to 50mm)Recording magnicationVertical magnication10X to 500,000X, AutoHorizontal magnication0.5X to 10,000X, AutoDetectorDetection methodDifferential inductanceStylus & Measuring force0.75mN stylus tip (cone): Tip taper angle: 60°, Tip radius: 2µm 4mN stylus tip (cone): Tip taper angle: 90°, Tip radius: 5µmPower supplyMeasuring main unit100V 50/60HzExternal dimensions(W×D×H)Measuring main unit756×482×996mm756×482×1166mm1156×482×1176mm1156×492×1436mm766×482×996mm766×482×1166mm1166×482×1176mm1166×492×1436mmMass140kg150kg220kg270kg140kg150kg220kg270kgNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.*1: Manual operation is also available.An inspection certicate is supplied as standard. Refer to page X for details.SV-3200SV-3200L4 (with options)


page 585