MEASURING INSTRUMENTS CATALOG No.E2016
591/682

L-16LMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Optional Accessories for SurftestLeveling tableV-block stage (A set of two)Maximum supportable diameter: ø25mmMass: 700gNo.181-902-10V-block with clampCan be mounted on the cross-travel table.No.998291Precision viseNo.178-019• Can be mounted on the cross-travel table.Step gageStep nominal value: 2µm, 10µmNo.178-611*Not available for the use with Surftest SJ-310/210.Roughness specimen for calibration Indication: Ra = approx. 3µmMaterial: Chrome-plated nickel.No.178-601Roughness specimen• For checking the stylus tip condition.Indication: Ra = approx. 3µm, 0.4µm (nominal)No.178-604Cross-travel table• Equipped with micrometer heads on the X and Y axes. Best suited for the alignment of axes since the inclination adjustment center and the rotation center are the same.Stand for vibration isolator• Stand dedicated to the installation of the vibration isolator (No.178-023, No.178-025).External dimensions (W×D×H): 640×470×660mmMass: 25kgNo.178-024Vibration isolator(actively pumped air system)No.178-023 (for standard base)No.178-093 (for simplified stand)** For Simplified stand (No.178-039) for SJ-410 and Simplified stand (No.178-089) for SJ-500.Vibration isolator(sealed air system)No.178-025 (for standard base)No.178-115 (for wide base)*Vibration isolator(stand integrated type, air system)No.12AAK110 (for standard base)No.178-119 (for wide base)Measurement WorkbenchNo.12AAQ587 (for standard base) No.12AAQ583 (for wide base)Monitor arm*No.12AAK120*Used with the vibration isolator (No.12AAK110, No.178-119)Side table*No.12AAL019*Used with the vibration isolator (No.12AAK110, No.178-119)Code No.Digimatic: 178-042-1Digimatic: 178-049Venier: 178-043-1Dimensions of table (W×D)130×100mmMaximum table loading15kgInclination range±1.5º̶±1.5ºRotation range±3º̶±3ºX- and Y-axes range±12.5mmResolution/Graduation0.001mm0.01mmExternal dimensions (W×D×H)262×233×83mm262×233×55mm220×189×83mmMass6.3kg5kg6kgFixing methodTwo-slide jawJaw opening36mmJaw width44mmJaw depth16mmTotal height38mmCode No.178-016Dimensions of table (W×D)130×100mmInclination range±1.5°Maximum table loading15kgExternal dimensions (W×D×H)130×100×40mmMass3kgWorkpiece diameter(using both V-grooves)ø1 to 7mmø6 to 160mmAn inspection certicate is supplied as standard. Refer to page X for details.

元のページ 

page 591

※このページを正しく表示するにはFlashPlayer10.2以上が必要です