MEASURING INSTRUMENTS CATALOG No.E2016
588/682

L-13LSurftestPerforms brilliantly in many situations such as in the quality control room, on the factory oor and on the production line. Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.For deep groove (10mm)Parts No.:12AAC735(2µm)*512AAB409(5µm)12AAB421(10µm)( ): Tip radiusFor knife-edge*8Parts No.:12AAC738(2µm)*512AAB411(5µm)12AAB423(10µm)( ): Tip radiusNosepiece*9For knife-edge Parts No.:12AAB354Nosepiece*9For deep groove 10Parts No.:12AAB349RemarksDepth: 10 or less, Width: 9.5 or moreFor narrow grooveParts No.:12AAB350RemarksDepth: 10 or less, Width: 3 or moreFor R-surfaceParts No.:12AAB351RemarksConvex: R1.5 or moreConcave: R3 or moreFor seesaw typeParts No.:12AAB352For eccentric arm*6Parts No.:12AAC739(2µm)*512AAB412(5µm)12AAB424(10µm)( ): Tip radiusFor deep groove*6 (20mm)Parts No.:12AAE893(2µm)*512AAE909(5µm)( ): Tip radiusFor deep groove*6 (40mm)Parts No.:12AAE895(2µm)*512AAE911(5µm)( ): Tip radiusFor deep groove*6 (20mm)Parts No.:12AAC736(2µm)*512AAB408(5µm)12AAB420(10µm)( ): Tip radiusNosepiece*9For deep groove 20Parts No.:12AAB348RemarksGroove depth: 20 or lessGroove width: 9.5 or moreFor deep groove (30mm)/Double-length for deep hole*6Parts No.:12AAE894(2µm)*512AAE910(5µm)( ): Tip radiusFor deep groove*6 (30mm)Parts No.:12AAC737(2µm)*512AAB407(5µm)12AAB419(10µm)( ): Tip radiusFor gear tooth/Double-length for deep hole*612AAE896(2µm)*512AAE912(5µm)*5( ): Tip radiusFor gear toothParts No.:12AAB339(2µm)*512AAB410(5µm)*512AAB422(10µm)*5( ): Tip radiusFor rolling circle waviness surface/Double-length for deep hole*6*8Parts No.:12AAE886(250µm)For corner hole/Double-length for deep hole*6Parts No.:12AAM601(2µm)*512AAM603(5µm)*5( ): Tip radiusNosepiece*9for cornerParts No.:12AAB353For rolling circle waviness surface*8Parts No.:12AAB338(ø1.588)For bottom surfaceParts No.:12AAE899(2µm)*512AAE915(5µm)( ): Tip radius *5: Tip angle 60°*6: For downward-facing measurement only The measurement force of the detector is out of warrantly230.9φ2.424.2φ1.290°37.744.7A識別色A部詳細Color coding*7Detail-A90°23ø2.4ø1.224.237.744.7A深溝用(20mm)7.6ø2.4ø1.20.937.744.7Ball ø1.5885.2転がり円うねり用2321.85.295.287.7ø2.4ø1.2深溝用2倍(20mm)43.842.65.2ø2.445.237.7ø2.4ø1.2深溝用(40mm)36.5355.2ø393.887.7ø1.2深溝用(30mm)深穴2倍36.535ø393.86.7787.7ø1.260°歯面用深穴2倍94.70.987.7ø1.2ø2.45.26.47.6転がり円うねり・深穴2倍93.887.7φ1.260°60°7.66.4φ2.4穴測定コーナー用・深穴2倍*7: Tip radius2µm5µm10µmColor codingBlackNo colorYellow*8: For calibration, a step gage (No.178-611, option) is also required.*9: The skid measurement (attaching a nosepiece to the detector) is available only with the SJ-410 and SJ-500 series.13ø2.40.9ø1.290°14.237.744.7AColor coding*7Detail-A深溝用(10mm)3331.85.2ø1.2Aø2.4ø2.490°37.745.2Color coding*7Detail-A深溝用(30mm)60°60°7.66.437.743.8ø1.2ø2.4AColor coding*7Detail-A歯面用7.6ø2.4ø1.290°37.70.944.7AColor coding*7Detail-Aナイフエッジ用A37.70.990°ø1.245.27.610ø2.4ø2.4Color codingDetail-AColor coding*7Detail-A心違い用90°ø2.4ø1.245.21.437.77.6ø2.410A穴底用7.4ø10.556.2ø2.444.337.7ø14 R4017.9ø7.23.521.553313.64.513.491.4511.610R210Stylusø14ø7.2(8.4)3.63.819.51.821.53.513.42.55910Stylusø1.5ø14 R4012.80.61.41.43.53.819.51.821.54.53.6109ø7.2StylusR24.4ø14ø7.2 R403.623.51.413.421.55.63.62.8103.5StylusR2ø14 R403.53.819.51.821.522.80.61.42720ø7.29Stylus3.6R21.44.4コーナー用ノーズピースø14 R401.43.50.521.5ø7.219.72.36.14.50.61.43.62.3R2Stylus4.4ナイフエッジ用ノーズピースø14 R4021.56.7ø7.25.63.63.63.523.52.8StylusFlatStyli

元のページ 

page 588

※このページを正しく表示するにはFlashPlayer10.2以上が必要です