MEASURING INSTRUMENTS CATALOG No.E2016
L-11LSurftestPerforms brilliantly in many situations such as in the quality control room, on the factory oor and on the production line. Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Surftest Extreme SV-3000CNC/SV-M3000CNCSERIES 178 — CNC Surface Roughness Testers• The X1-, Y and Z2 axes have a maximum drive speed of 200mm/s. This permits high-speed positioning that can potentially result in a large increase in the throughput of multiple-profile / multiple-workpiece measurement tasks.• Capable of inclined plane measurement through 2 axis simultaneous control in X and Y. * Optional Y-axis table is required when using the SV-3000CNC.• For models equipped with the α axis, it is possible to perform continuous measurement over horizontal and inclined surfaces by power-tilting the drive unit.• For models with the Y-axis table, it is possible to expand the measuring range for multiple workpieces, etc., through positioning in Y.• Measuring force for the Z1-axis detector is selectable from 4mN or 0.75mN.• All connecting cables are incorporated into the measuring instrument to eliminate the inconvenience for measurement.• Since the Z1-axis detector incorporates an anti-collision safety device, the machine will automatically stop if the detector touches a workpiece or jig.• Surftest Extreme SV-3000CNC (CNC Surface Roughness Tester with the movable Y-axis column unit) that handles measurement of large/heavy workpieces such as engine blocks, crankshafts, etc., is also available.• Optional external control function (Ext I/O) through bidirectional communication (RS-232C) with the PLC (programmable logic controller) is available.SV-3000CNC SPECIFICATIONSSV-M3000CNC SPECIFICATIONSRefer to the CNC Form Measuring Instrument Series (Catalog No.E4284) for more details.SV-M3000CNC(Surface Roughness Tester with movable Y-axis column unit.)(The photo represents a special specification model.)SV-3000CNC(Inclinable drive unit + Y-axis table)X1-axis (drive unit)Measuring range200mmResolution0.05µmScale typeReective-type linear encoderDrive speedCNC modeMax. 200mm/sJoystick mode0 to 60mm/sMeasuring speed0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0mm/sMeasuring directionBackward Straightness0.5µm/200mmZ2 axis (column)Travel rangeZ2 axis (column, type S)300mmZ2 axis (column, type H)500mmResolution0.05µmScale typeReective-type linear encoderDrive speedCNC modeMax. 200mm/sJoystick mode0 to 60mm/sBase size (width×depth)750×600mmBase materialGabbroNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.X1-axis (drive unit)Measuring range200mmResolution0.05µmScale typeReective-type linear encoderDrive speedCNC modeMax. 200mm/sJoystick mode0 to 50mm/sMeasuring speed0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0mm/sStraightnessWhen using a standard detector0.5µm/200mmWhen using a long-type detector0.7µm/200mmWhen using a rotary-type detector holderUp/down direction0.5µm/200mmForward/backward direction0.7µm/200mmZ2 axis (column)Measuring range500mmResolution0.05µmScale typeReective-type linear encoderDrive speedCNC modeMax. 200mm/sJoystick mode0 to 50mm/sY axisMeasuring range800mmResolution0.05µmScale typeReective-type linear encoderDrive speedCNC modeMax. 200mm/sJoystick mode0 to 50mm/sMeasuring speed0.02 to 2mm/sStraightnessWhen using a standard detector holderNarrow range 0.5µm/50mmWide range 2µm/800mmWhen using a long-type detector holderNarrow range 0.7µm/50mmWide range 3µm/800mmWhen using a rotary-type detector holder (up/down direction)Narrow range 0.7µm/50mmWide range 3µm/800mmBase unitBase size (width×depth)600×1500mmBase materialSteelMaximum table loading300kgAn inspection certicate is supplied as standard. Refer to page X for details.