G-22GMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.SERIES 542 Linear Gage Counter (Panel mount, Single-function Type)EG Counter•Produces 3-step/5-step, 7 kinds of tolerance output and limit value output independently for each of 7 channels.•Comes with serial BCD output capability, for connection to a programmable controller or personal computer, etc.•Dynamic measurement possible with simplied analog output.•Employs DIN size (96×48mm) and mount-on-panel conguration to facilitate system integration.Function• Preset• Direction switch• Tolerance judgment (3/5-step, 3 kinds)• Peak (max., min., runout) measurement• Constant number• Smoothing• Error display/output• Key protectionOptional Accessories• I/O output connector (with cover): 02ADB440• AC adapter: 02ADN460• AC cable (Japan): 02ZAA000*• AC cable (USA): 02ZAA010*• AC cable (EU): 02ZAA020*• AC cable (Britain): 02ZAA030*• AC cable (China): 02ZAA040*• AC cable (Korea): 02ZAA050*• Terminal connecting cable: 02ADD930** Required when using AC adapter.EG-101PEG-101ZEG-101D542-015542-017542-016Refer to the Linear Gage (Catalog No.E13007) for more details.SPECIFICATIONSOrder No.542-015542-017542-016Quantizing error±1 countMaximum input frequency1.25MHz, response speed depends on gage specification.—Resolution( ) indicates maximum display range0.01mm (±9999.99mm) / .0005" (±99.9995") / .001" (±999.999")0.005mm (±9999.995mm) / .00005" (±9.99995") / .0001" (±99.999")0.001mm (±999.999mm) / .00005" (±9.99995") / .0001"(±99.999")0.0005mm (±99.9995mm) / .000005" (±.999995") / .00001" (±9.99999")0.0001mm (±99.9999mm) / .000005" (±.999995") /.00001" (±9.99999")0.01mm (±9999.99mm) / .0005" (±99.9995") / .001" (±999.999")0.001mm (±999.999mm) / .00005" (±9.99995") /.0001" (±99.999") [Automatic setting by gage]DisplaySign plus 6 digits (Green LED)Tolerance judgment displayLED display (3 steps: Amber, Green, Red/ 5 steps: Amber, Amber flashing, Green, Red flashing, Red)Tolerance judgment outputL1 to L5 (Open-collector / Switchover between L1 to L5 and BCD output with parameter)Control outputNormal operation signal (NOM): open-collectorBCD outputOpen-collector / Switchover between 6-digit (positive/negative-true logic) and tolerance judgment output with parameterControl inputPresetting, display hold, peak value clear, tolerance judgment BANK switchRatingPower supply voltage12 - 24V DC Power consumption6W or less (500mA max.)Ensure at least 1A is available per unit.Operating temperature range0 to 40°C (RH 20 to 80%, no condensation)Storage temperature range–10 to 50°C (RH 20 to 80%, no condensation)External dimensions96 (W) × 48 (H) × 156 (D) mmApplicable gage headLGE, LGF, LGK, LGB, LGM, LG, LGH (LGH110 excluded)Models with reference point mark, sine wave output type are excluded.LGF with reference point markLGD, LGS, ID, SDApplicable inputDifferential square-waveDifferential square-wave with origin point markDigimatic code (SPC)Number of gage inputs1MassApprox. 400gUnit: mmDIMENSIONS+VDC IN 12-24V 500mA-VOUTPUTINPUT154.64896966.6137(11)91.444.4154.64896966.6137(11)91.444.4INPUTOUTPUT-VDC IN 12-24V 500mA+V154.64896966.6137(11)91.444.4INPUTDC IN 12-24V 500mA**********-*********Serial No.ModelCode No.


page 453