F-18FMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.The stability of measurement within 0.2mm from the start of spindle travel is not guaranteed, so this region should not be used during operation.Origin setting of Digimatic IndicatorsEC CounterSERIES 542 — Low-cost, Modular Type Display Unit• 3 steps of limit setting value can be displayed. • Can be set to produce either tolerance judgment output or Digimatic output. • Small size (96 x 48mm) which conforms to DIN standards. • Refer to page G-21 for details.676.696484844.4パネルカット寸法92+0.8045+0.8091.40.2mmSupplemental information on Digimatic IndicatorsDIMENSIONSUnit: mm542-007


page 359