MEASURING INSTRUMENTS CATALOG No.E2016
355/682

F-14FMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.• General purpose indicator with the measuring range of 25.4mm/ 1”.• Cost-effective and user-friendly type which is equipped with the basic functions necessary. • The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors. Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18.• Battery life of 20,000 hours in continuous use has been achieved. • Easy-to-read large LCD readout with the character height of 8mm. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. ABSOLUTE Digimatic Indicator ID-USERIES 575 — Slim and Economical Design575-121M2.5X0.45180.3ø4.87.341.32740126ø8 0-0.0092338SPECIFICATIONSMetricOrder No. (w/ lug, at-back)RangeResolutionAccuracy*Measuring force—575-12125.4mm0.01mm0.02mm1.8N or lessInch/MetricOrder No. (w/ lug, at-back)RangeResolutionAccuracy*Measuring force—575-1221” / 25.4mm.0005”/0.01mm.001” / 0.02mm1.8N or less—575-123DIMENSIONSUnit: mmTechnical DataAccuracy:Refer to the list of specications (Excluding quantizing error of ±1 count)Resolution:0.01mm, .0005"/0.01mmDisplay:5-digit and signScale type: ABSOLUTE electrostatic linear encoderMax. response speed:Unlimited (Measurement by scanning cannot be performed)Measuring force: Refer to the list of specicationsStem dia.:8mm (ISO/JIS type) or 3/8” (ANSI/AGD type)Standard contact point:901312 (ISO/JIS type) 21BZB005 (ANSI/AGD type)Battery:SR44 (1 pc.), 938882 for initialoperational checks (standard accessory)Battery life:Approx. 20,000 hours of continuous useDust/Water protection level: IP42Lifting lever:137693FunctionOrigin-set (Zeroset), Counting direction switching, Power ON/OFF, Data output, inch/mm conversion (inch/mm models)Alarm:Low voltage, Counting value composition errorOptional Accessories• Spindle lifting cable (stroke: 10mm) : No.540774• SPC Cable: No.905338 (1m) No.905409 (2m)• USB Input Tool Direct (2m) : No.06ADV380F• Connecting Cables for U-WAVE-T (160mm): No.02AZD790F For footswitch : No.02AZE140F Refer to page F-60 for details.• Digimatic Mini-Processor DP-1VR: 264-504• Contact points for Mitutoyo’s dial indicators (Refer to pages F-46 to F-49 for details.)• Measuring stands  (Refer to page F-79 to F-85 for details.)General-purpose type Note 1:Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.Note 2:Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.ISO/JIS Type*Quantizing error of ±1 count is excluded*Flat back only(Refer to page X for details.)ISO/JIS typeASME/ANSI/AGD type

元のページ 

page 355

※このページを正しく表示するにはFlashPlayer10.2以上が必要です