D-56DMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Various peripheral devices●(1)●(2)●(3)●(4)●(6)●(8)●(9)●(10)●(12)●(13)●(14)●(15)●(16)●(17)●(18)●(11)●12AAN048*2 Receipt printer (for Japan)12AAN049*2 Receipt printer (for North America)12AAN050*2 Receipt printer (for EU; excluded U.K.)12AAN051*2 Receipt printer (for U.K.)● 12AAN052: Receipt paper (10-roll set)● 12AAA804: Cable for page printer (2m)● 12AAA807: RS-232C cable (2m/80”)● 12AAG920: RS-232C cable (3m/118”)● Digimatic cableNo.936937 (1m) No.965014 (2m)●For Linear Height and QM-Height ●For Linear Height only●●●●●●●●●●●●●● 12AAF668: ø10mm ball probe, L = 82mm (coaxial type) 12AAF669: ø10mm ball probe, L = 120mm (coaxial type) 12AAF670: ø5mm disk probe 12AAF671: ø10mm disk probe(12) 957264: ø14mm disk probe(13) 957265: ø20mm disk probe 12AAF672: ø1mm ball offset probe(14) 12AAA788: ø4mm ball offset probe ø5mm ball offset probe 05HAA394(15) 12AAA789: ø6mm ball offset probe(16) 226116: Test indicator (ø6mm stem) adapter Sample workpiece 12AAA879(17) 226117: M2 CMM stylus adapter*1(18) 226118: M3 CMM stylus adapter*1● CMM ball and disk hard probes are available. ø2 932377A, ø3 932378A ø5 932379A, ø6 932380A ø10 532328 Disc probe ø20 532345, ø30 930803● 12AAF712: Battery pack●●●●●●●●●●●●(1) 12AAC072: Depth probe(2) 12AAC073: ø20mm taper probe(3) 12AAA792: Dial indicator (ø8mm stem) holder(4) 12AAA793: Probe extension holder (85mm/3.3”) 12AAB136: ø10mm cylindrical probe(6) 932361: Mu-checker lever head holder* *Additional auxiliary weights are required (total 4 pcs). 12AAF666: ø1mm ball probe (coaxial type) 12AAF667: ø2mm ruby ball probe (coaxial type)(8) 957261: ø2mm ball probe (coaxial type)(9) 957262: ø3mm ball probe (coaxial type)(10) 957263: ø4mm ball probe (coaxial type)(11) 12AAB552: ø10mm ball probe, L = 55mm (coaxial type)The power grip makes it easy to approach the workpiece.The sample workpiece shown in the above photo is an optional accessory (12AAA879).Thickness measurement (Outside)Width measurement (Inside)Height measurement (Upward facing)Height measurement (Downward facing)Diameter measurement (Hole)*1 For enabling CMM styli to be used. *2Attachment for xing the connecting cable is provided asstandard. 1013377977600262ø5237(10)(68)28882.5DIMENSIONS Optional accessoriesUnit: mmExample of measurements


page 275