MEASURING INSTRUMENTS CATALOG No.E2016
216/682

C-47CMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.Setting RingsSERIES 177 — Accessories for Inside Micrometers, Holtest and Dial Bore GagesTøE25.4ødøDTødøDHKHK(H)(H) Side face(Marking face)Side faceSide face Side face(Marking face)Diameter calibrated at this positionMarkingMarkingType AType BBore GagesFor easy and accurate measurement of inside diametersHow to read the indicated valueSeries 526 The 526 series has a gage head with high curvature. Alignment with the diameter (a-a') is achieved by rotating the gage head in the direction indicated by the arrow, and the reading is the maximum value read from the dial indicator.Series 511The 511 series provides a guide plate to align the setting ring diameter with the measurement axis of the bore gage. aa'Guide plateAnvilContact pointWorkpieceaa'Guide plateAnvilContact pointWorkpiece5図径ま値5簡のDIMENSIONSUnit: mmSufx177-***-12:With Inspection Certicate(provides a record of the calibrated diameter) 177-***-62:With Inspection Certicate (provides a record of the calibrated diameter) and Calibration Certicate177-***-82:With Inspection Certicate (provides a record of the calibrated diameter), Calibration Certicate, and Traceability System ChartNotes: 1) The Inspection Certicate is not a substitute for a calibration certicate as it is undated.2) A more detailed inspection certicate describing roundness and cylindricity is available on request.Steel Setting RingsCERA Setting Rings177-146177-429177-432177-300

元のページ 

page 216

※このページを正しく表示するにはFlashPlayer10.2以上が必要です