MEASURING INSTRUMENTS CATALOG No.E2016
200/682

C-31CMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Bore GagesSERIES 511 — for Small Holes• Alternative indicators may be used in place of those recommended*.* Some indicators and protection covers cannot be used with these bore gages. Contact a Mitutoyo sales ofce if considering the use of dial or digimatic indicators other than the recommended models. • Setting Rings are available to aid in accurately setting a gage before making a measurement. (For details, refer to page C-47)6 - 10mm10 - 18.5mmBore GagesFor easy and accurate measurement of inside diametersClose-up view of anvils and contact pointsTechnical DataAccuracy:Metric models: 5μmInch models: .0002"Repeatability:Metric modes: 2μmInch models: .00008"Adjacent error:Metric modes: 2μmInch models: .00008"Optional Accessories– :Dial indicator (See Chapter F)21DZA000: Dial protection cover Recommended digimatic indicators (see Chapter F)Metric models:2046SB (0.01mm)2972TB (0.01mm - One-revolution type)2109SB-10 (0.001mm)2900SB-10 (0.001mm - One-revolution type)Inch models:2922SB (.0005")2977TB (.0005" - One-revolution type)2923SB-10 (.0001")2910SB-10 (.0001" - One-revolution type)Recommended digimatic indicators (see Chapter F)Metric models:543-310B (ID-C112GXB: 0.001mm)Inch models:543-312B (ID-C112GEXB: 0.001mm/.00005")* Indicators equipped with rubber bellows, such as water-proof types, cannot be used.SPECIFICATIONSMetricOrder No.RangeStroke of contact pointMeasuring forceGuide forceContent of setProbing depthBore gageDial indicatorDial protection coverAnvilInterchangeable Washer511-2096-10mm0.5mm2N or less—511-209Not suppliedNot supplied9 pcs.Not supplied50mm511-20110-18.5mm0.6mm6N or less511-2011 pc.100mm511-2106-10mm0.5mm2N or less—511-2092109SB-10(Graduation: 0.001mm)21DZA0009 pcs.Not supplied50mm511-20310-18.5mm0.6mm6N or less511-2011 pc.100mm511-2116-10mm0.5mm2N or less—511-2092046SB(Graduation: 0.01mm)21DZA0009 pcs.Not supplied50mm511-20410-18.5mm0.6mm6N or less511-2011 pcs.100mmInchOrder No.RangeStroke of contact pointMeasuring forceGuide forceContent of setProbing depthBore gageDial indicatorDial protection coverAnvilInterchangeable Washer511-214.24-.4".020"2N or less—511-214Not suppliedNot supplied9 pcs.Not supplied2"511-205.4-.74".024"6N or less511-2051 pc.4"511-212.24-.4".020"2N or less—511-2142923SB-10(Graduation: .0001")21DZA0009 pcs.Not supplied2"511-206.4-.74".024"6N or less511-2051 pc.4"511-213.24-.4".020"2N or less—511-2142922SB(Graduation: .0005")21DZA0009 pcs.Not supplied2"511-207.4-.74".024"6N or less511-2051 pc.4"511-201The dial indicator and protection cover are optional.

元のページ 

page 200

※このページを正しく表示するにはFlashPlayer10.2以上が必要です