MEASURING INSTRUMENTS CATALOG No.E2019
539/608

L-8Mitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• The operation flow is significantly shortened by arranging the controls for stylus position change, measurement start/stop and return on the front of the drive unit.• Fine and coarse X-axis positioning can be performed easily by using the jog shuttle that covers the whole measuring range. • The quick-vertical-motion stand allows operators to swiftly and easily move the drive unit to and from the measurement height without having to push or pull (only for CV-2100M4). • The detector unit (Z1 axis) is equipped with a highly accurate arc scale. This scale directly tracks the arc locus of the stylus tip so that the most accurate compensation can be applied to the scale output, which leads to higher accuracy and resolution. Operators are free from bothersome operations such as measurement magnification switching and calibrating each magnification as required for analog instruments.Contour Measuring System enabling mea-surement that is fast, accurate, and easy.Refer to the Contracer CV-2100 Brochure (No. E15020) for more details.An inspection certicate is supplied as standard. Refer to page U-11 for details.Motor-driven jog shuttleQuick-vertical-motion stand Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).Contracer CV-2100SERIES 218 — Contour Measuring InstrumentsSPECIFICATIONSModel No.CV-2100M4CV-2100N4Measuring rangeX axis100 mmZ1 axis (detector unit)50 mmZ2-axis (column) travel range350 mm—X-axis inclination angle±45°ResolutionX axis0.1 µmZ1 axis0.1 µmDrive methodX axisMotor (0 - 20 mm/s)Vertical travel (Z-axis column)Manual (Quick-vertical-motion, fine)̶Measuring speed0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 mm/sStraightness (when the X axis is horizontal)2.5 µm/100 mmAccuracy(20 °C)X axis±(2.5+0.02L) µm L = Measurement Length (mm)Z1 axis±(2.5+|0.1H|) µm H = Measurementt height from horizontal position within ±25 mmMeasuring directionBoth pulling and pushing directionsMeasuring face directionDownward directionMeasuring force30±10 mN(3 gf)Traceable angle (using the standard stylus)Ascent 77°, Descent 87° (according to surface property)External dimensions (W×D×H)745 × 450 × 885 mm651 × 143 × 138.5 mmMass145.8 kg5.8 kgNote 1: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.Note 2: For the CV-2100N4, a manual column stand is required (optionally available.)CV-2100M4CV-2100M4 Notebook PC Form Analysis program FORMTRACEPAKDesktop PCCV-2100N4Optional Column Stand for CV-2100N4• Allows the use of the CV-2100N4 in a fixed configuration.218-042 Base material: GraniteInclination range: ±45°Vertical travel: 320 mmMass: 110 kgNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.Highly accurate arc scaleContracer High precision + High-function + High operability = Contracer Centralized front control panel L

元のページ  ../index.html#539

このブックを見る