K-11KVision Measuring SystemsVision measuring systems for multipurpose useMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.QVPAK Data Processing Software for QUICK VISION•The X, Y, and Z position data is detected from the measurement data gathered by the Quick Vision system and the arithmetic processing of coordinates and dimensions is performed immediately. Edge Detection ToolsCircle ToolThis tool detects circular edges with a minimum of one pixel space. Edges can be specified easily with a single click.Box ToolThis tool detects linear edges with a minimum of one pixel interval. Compared to the point tool, the Box tool can perform averaging and remove abnormal points, which enables stable measurements.Pattern Search ToolThis tool performs pattern matching to detect a position, and is optimal for positioning alignment marks and similar tasks.Area Centroid ToolThis tool detects the position of a form's centroid, and is suited to the positioning of different forms.Auto Trace ToolThis is a shape-measuring tool that automatically tracks a contour with input consisting only of a start point and end point.Arc ToolThis tool is suited to detection of arcs and corner radii.Maximum/Minimum ToolThis tool detects the maximum or minimum point within the range.Point ToolThis is a basic tool for detecting one point.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).Refer to the QUICK VISION Brochure (No. E14007) for more details.Gesture operation, like operating a smartphone, enables easy tool layout or stage shifting on systems with touch screens.