K-7KVision Measuring SystemsVision measuring systems for multipurpose useMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.QV TP CNC Vision Measuring System equipped with a Touch Trigger ProbeNon-contact and contact measurement on one machine• QV touch-trigger probe unit enables both vision measurement and touch-trigger probe measurement.3D workpiece measurement• Measures three-dimensional workpieces such as light-alloy molded products, plastic molded products, machined products, and more.Module change rack available• Easily change between vision and touch-trigger probe measurement using a module change rack.Specications with touch-trigger probe options mountedMaster ballCalibration ringModule change rack, MCR20PH6TP200 Model No.QVTP Active 202QVTP Apex302Hyper QVTP302QVTP Active 404QVTP Apex404Hyper QVTP404QVTP Apex606Hyper QVTP606 Measuring range*1 (X×Y×Z)Vision250×200×150 mm300×200×200 mm400×400×200 mm400×400×250 mm600×650×250 mmCommon to Touch-trigger Probe184×200×150 mm234×200×200 mm334×400×200 mm334×400×250 mm534×650×250 mmMeasuring accuracy*2 (Touch-trigger probe)E1X,E1Y,E1Z (2.4+3L/1000) µmQVTP Apex: (1.8+3L/1000) µmHyper QVTP: (1.7+3L/1000) µm (2.4+3L/1000) µmQVTP Apex: (1.8+3L/1000) µmHyper QVTP: (1.7+3L/1000) µm*1 When a module change rack, a master ball, and a calibration ring are mounted, the measurement ranges are smaller than those in the table. Other specifications are the same as those for QV Active, QV Apex, and Hyper QV. Please contact our sales office for more details.*2 Inspected by Mitutoyo standard. L = length between two arbitrary points (mm)Refer to the QUICK VISION Brochure (No. E14007) for more details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).An inspection certicate is supplied as standard. Refer to page U-11 for details.