MEASURING INSTRUMENTS CATALOG No.E2019
467/608

G-32GMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.ø3.18-M3805.510525054.584.54242170558050*788482594857202618.5502210.515.59.59.514.59.541579012110902010303554653684295.565.515057.5130(Measuring position)Signal cableMin. 70Cable spaceRelay cableEmission UnitMax. 350Measuring rangeMeasuring rangeReception UnitBaseM4, depth 8, ø3.3 through hole (×3)For mounting side plate (same in the back)M4, depth 8, ø3.3 through hole (×2)For mounting side plate (same in the back)To Reception Unit(Cable length 1.4 m) ø3.1, depth 6 (Reference hole)M4, depth 8 (×3)For mounting base ø3.1, depth 6 (Reference hole)M4, depth 8 (×3)For mounting baseDimension when disconnected (bottom view)Emission Unit: 1.1 kgReception Unit: 0.6 kgBase: 0.5 kgSignal cable (5 m): 0.5 kg*7: Extendable up to 270 mm12-M3ø3.115.510.5110*716388192348662060424218.59036090225010058707258102540185822011013012115.571797168.587874214.59.5162174.5121639.59.5273(Measuring position)Signal cableMin. 70Cable spaceReception UnitRelay cableEmission UnitMax. 700Measuring rangeMeasuring rangeBaseM5, depth 10, ø4.2 through hole (×3)For mounting side plate (same in the back)M5, depth 10, ø4.2 through hole (×2)For mounting side plate (same in the back)To Reception Unit(Cable length 1.4 m) ø3.1, depth 6 (Reference hole)M5, depth 10 (×3)For mounting base ø3.1, depth 6 (Reference hole)M5, depth 10 (×3)For mounting baseDimension when disconnected (bottom view)Emission Unit: 1.4 kgReception Unit: 0.8 kgBase: 0.8 kgSignal cable (5 m): 0.5 kg*7: Extendable up to 537 mmDIMENSIONSUnit: mmDIMENSIONSUnit: mmLSM-503S Measuring UnitSERIES 544 — 0.3 mm to 30 mm Measuring Unit•Ensures ±1.0 µm accuracy over the entire measuring range (0.3 to 30 mm).•Narrow range accuracy of ±(0.6+0.1D) µm for high-precision measurement.Optional Accessories• Multifunctional display unit, LSM-6200:• Panel-mount type display unit, LSM-5200: • Standard calibration gage set (ø0.1, ø30.0): 02AGD130• Adjustable workstage: 02AGD490• Air blower: 02AGD240• Workstage: 02AGD270• Extension signal cable (max. 25 m)Optional Accessories• Multifunctional display unit, LSM-6200:• Panel-mount type display unit, LSM-5200: • Standard calibration gage set (ø0.1, ø60.0): 02AGD140• Adjustable workstage: 02AGD520• Air blower: 02AGD250• Extension signal cable (max. 25 m)Order No.Cable length02AGN780A5 m02AGN780B10 m02AGN780C15 m02AGN780D20 mOrder No.Cable length02AGN780A5 m02AGN780B10 m02AGN780C15 m02AGN780D20 m• Extension relay cable (max. 5 m)02AGC150A1 m02AGC150B3 m02AGC150C5 m• Extension relay cable (max. 5 m)02AGC150A1 m02AGC150B3 m02AGC150C5 mSPECIFICATIONSOrder No.544-535544-536Applicable laser standardsJISIEC, FDAUser's ManualJapanese versionEnglish versionMeasuring range0.3 to 30 mmResolution0.02 to 100 µm (selectable)Repeatability*1±0.11 µmAccuracy*2 (20 °C)Whole range±1.0 µmNarrow range±(0.6+0.1D) µm*3Positional error*4±1.5 µmMeasuring range*510×30 mm (0.3 to 30 mm)Scanning rate3200 scans/sLaser wavelength650 nm (Visible)Laser scanning speed226 m/sOperating environmentTemperature0 to 40 °CHumidityRH 35 to 85 % (non-condensing)Protection LevelIP64*6*1 Determined at the level of ±2 (: standard deviation) when measuring ø30 mm at the interval of 0.32 sec. (average 1024 times).*2 Applies at the center of the measuring range when measuring outside diameters.*3 D=Difference in diameter between the master gage and workpiece (Unit: mm)*4 An error in outside diameter measurement due to variation in workpiece position either in the optical axis direction or in the scanning direction.*5 The area given by [optical axis direction]×[scanning direction].*6 The protection level provided for the interior. If the workpiece or glass of the measuring unit window is soiled by water or dust, the unit may malfunction.Order No.Remarks544-046Japanese user's manual544-047English user's manualOrder No.Remarks544-046Japanese user's manual544-047English user's manualOrder No.Display typeRemarks544-071Japanese mm/EJapanese user's manual544-071*English mm/EEnglish user's manual544-072*English mm/inch* To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, F for SAA, K for KC, C and No suffix are required for PSE."Order No.Display typeRemarks544-071Japanese mm/EJapanese user's manual544-071*English mm/EEnglish user's manual544-072*English mm/inch* To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, F for SAA, K for KC, C and No suffix are required for PSE."LSM-506S Measuring UnitSERIES 544 — 1 mm to 60 mm Measuring Unit•Ensures ±3 µm accuracy over the entire measuring range (1 to 60 mm).•Narrow range accuracy of ±(1.5+0.5D) µm for high-precision measurement.SPECIFICATIONSOrder No.544-537544-538Applicable laser standardsJISIEC, FDAUser's ManualJapanese versionEnglish versionMeasuring range1 to 60 mmResolution0.05 to 100 µm (selectable)Repeatability*1±0.36 µmAccuracy*2 (20 °C)Whole range±3 µmNarrow range±(1.5+0.5D) µm*3Positional error*4±4 µmMeasuring range*520×60 mm (1 to 60 mm)Scanning rate3200 scans/sLaser wavelength650 nm (Visible)Laser scanning speed452 m/sOperating environmentTemperature0 to 40 °CHumidityRH 35 to 85 % (non-condensing)Protection LevelIP64*6*1 Determined at the level of ±2 (: standard deviation) when measuring ø60 mm at the interval of 0.32 sec. (average 1024 times).*2 Applies at the center of the measuring range when measuring outside diameters.*3 D=Difference in diameter between the master gage and workpiece (Unit: mm)*4 An error in outside diameter measurement due to variation in workpiece position either in the optical axis direction or in the scanning direction.*5 The area given by [optical axis direction]×[scanning direction].*6 The protection level provided for the interior. If the workpiece or glass of the measuring unit window is soiled by water or dust, the unit may malfunction.

元のページ  ../index.html#467

このブックを見る