MEASURING INSTRUMENTS CATALOG No.E2019
347/608

F-8FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Inch/MetricOrder No. (w/lug, at-back)Range (in)ResolutionOverall accuracy*1*2*3 (in)Measuring force (N)Remarks543-391543-391B0.50.0005/0.0001/0.00005 in/0.01/0.001 mm0.00011.5 or less—543-392543-392B1.5 or less—543-395543-395B0.4 - 0.7Low measuring force543-396543-396B0.4 - 0.7Low measuring force—543-471B11.8 or less*4——543-472B1.8 or less*4——543-491B20.00022.3 or less*4——543-492B2.3 or less*4—543-401543-401B0.50.0005 in/0.01 mm0.0010.9 or less—543-402543-402B0.9 or less—543-405543-405B0.2 - 0.5Low measuring force543-406543-406B0.2 - 0.5Low measuring force—543-475B11.8 or less*4——543-476B1.8 or less*4——543-495B20.00152.3 or less*4——543-496B2.3 or less*4—*1 Hysteresis: 0.0001 in/0.002 mm (0.0005/0.0001/0.00005 in/0.01/0.001 mm resolution type), 0.001 in/0.02 mm (0.0005 in/0.01 mm resolution type)*2 Repeatability: 0.0001 in/0.002 mm (0.0005/0.0001/0.00005 in/0.01/0.001 mm resolution type), 0.001 in/0.02 mm (0.0005 in/0.01 mm resolution type)*3 These values apply at 20 ºC, and quantizing error of ±1 count is excluded. *4 Applies for a spindle orientation between the spindle pointing vertically downward to the spindle horizontal.SPECIFICATIONSMetricOrder No. (w/lug, at-back)Range (mm)Resolution (mm)Overall accuracy*1*2*3 (mm)Measuring force (N)Remarks543-390543-390B12.70.001/0.010.0031.5 or less—543-394543-394B0.4 - 0.7Low measuring force—543-470B25.41.8 or less——543-490B50.80.0052.3 or less—543-400543-400B12.70.010.020.9 or less—543-404543-404B0.2 - 0.5Low measuring force—543-474B25.41.8 or less——543-494B50.80.042.3 or less—*1 Hysteresis: 0.002 mm (0.001/0.01 mm resolution type), 0.02 mm (0.01 mm resolution type)*2 Repeatability: 0.002 mm (0.001/0.01 mm resolution type), 0.02 mm (0.01 mm resolution type)*3 These values apply at 20 ºC, and quantizing error of ±1 count is excluded. ISO/JIS type ASME/ANSI/AGD typeSpindle orientationSpringWeight (approximately 0.1 N)Maximum measuring force (N)Pointing vertically downwardYesYes0.5 or lessYesNo0.4 or lessNoYes0.3 or lessNoNo0.2 or lessHorizontalYesNo0.3 or lessNote: Operation using congurations other than shown above is not guaranteed.Setting measuring force on low measur-ing force models• 543-404/404B/405/405B/406/406BSpindle orientationSpringWeight (approximately 0.1 N)Maximum measuring force (N)Pointing vertically downwardYesYes0.7 or lessYesNo0.6 or lessNoYes0.4 or lessNoNoNot guaranteedHorizontalNot guaranteedNote: Operation using congurations other than shown above is not guaranteed.• 543-394/394B/395/395B/396/396B12.7 mm range modelsCode No.543-400(B)/543-390(B)/543-404(B)/543-394(B)Model No.ID-C1012X(B)/112X(B)/1012CX(B)/112CX(B)ø8 0-0.0097.321.21754.446.550.1ø10.92028.87.6ø59ø54513.31.7ø6.532°Ball contact (ø3)901312(threaded: M2.5×0.45)DIMENSIONSUnit: mmISO/JIS TypeNote: Products with an Order No. sufxed "B" have a plain back, and other models have a center-lug back. Refer to page F-61 for details of the backs.Ball contact (ø0.12)21BZB005(thread: No. 4-48UNF)ø0.191/4ø0.431.131/4ø2.13ø2.320.301.971.742.000.580.793/4ø1/4ø0.375 0 -0.0012ASME/ANSI/AGD TypeUnit: in

元のページ  ../index.html#347

このブックを見る