MEASURING INSTRUMENTS CATALOG No.E2019
342/608

F-3FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.• Solar poweredAn environmentally friendly measuring instrument that does not require batteries, eliminating the hassle and cost of battery replacement. Can operate down to a minimum light level of 40 lux – lower than the level in a warehouse.• Built-in rechargerThe large-capacity built-in reservoir capacitor allows you to use the indicator for long periods of time under light conditions below the minimum level.• User-friendly buttonsAll functions can be accessed by using the two or three large buttons on the front of the indicator.• Origin recorded even if display disappears.The indicator includes an ABS (absolute) scale that allows the previously set origin to be restored even if the display disappears due to insufcient light, making it easy to resume measurement. This feature makes ID-SS ideal for long-time or multi-point measurement.• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems (refer to page A-3).ABSOLUTE Solar-Powered Digimatic Indicator ID-SSSERIES 543Digimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.543-500Technical Data• Display: 6-digit LCD, sign• Measuring force: 1.5 N or less• Usable orientations: All• Power supply: Solar battery (for indoor use)• Minimum Operating light: 40 lux Note: A built-in reservoir capacitor allows a fully chargedID-SS to be used for about 3.5 hours under light illumination below the minimum level.The charging time differs depending on the environment, but it usually takes about 1.5 hours for a fully discharged ID-SS to fully recharge under light conditions of 500 lux.• Maximum response speed: No limit (scan-type measurement is not supported)Functions• Origin set (Zero-setting)• Direction switching• Data output• Error alarm displayAn inspection certicate is supplied as standard. Refer to page U-11 for details.SPECIFICATIONSMetricOrder No.Range (mm)Resolution (mm)Accuracy*1 (mm)Back typeOverall*2HysteresisRepeatability543-50012.70.0010.0030.0020.002With lug543-500BFlat543-5050.010.020.020.01With lug543-505BFlatInch/MetricOrder No.RangeResolutionAccuracy*1Back typeOverall*2HysteresisRepeatability543-5010.5 in/12.7 mm0.00005 in /0.001 mm±0.0001 in/0.003 mm0.0001 in/0.002 mm0.0001 in/0.002 mmWith lug543-501BFlat543-502With lug543-502BFlat543-5060.0005 in/0.01 mm±0.0010 in/0.02 mm0.0010 in/0.02 mm0.005 in/0.01 mmWith lug543-506BFlat543-507With lug543-507BFlat*1 These values apply at 20 ºC, and quantizing error of ±1 count is excluded.*2 Overall magnication and linearity.Note: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-25.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details). ISO/JIS type ASME/ANSI/AGD type

元のページ  ../index.html#342

このブックを見る