MEASURING INSTRUMENTS CATALOG No.E2019
320/608

E-29EMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Maintenance Kit for Gauge Blocks SERIES 516(5) Cleaning paper (600006)(lens paper, 82×304 mm, 500 pcs)Used for wiping off rust preventive oil and contamination. Lint free.(6) Articial leather mat (B4 size) (600007)Used as a gauge block mat in order to avoid scratches on the work table(7) Reagent bottle (600008)(polyethylene container, 100 ml)Bottle of wiping solution. (Mitutoyo employs n-Heptane for solvent.)(8) Gloves (600009)Used for handling large gauge blocks. Effective for the prevention of corrosion and thermal expansion.Order No. 516-650E Tools and accessories included:(1) Ceraston (601645)(both sides nished by lapping)(100×25×12 mm)(2) Optical at (158-117)(ø45, 12 mm thickness, Flatness 0.2 μm)Used to check the wringing of thin gauge blocks and for the presence of burrs.(3) Tweezers (600004)Used for handling thin gauge blocks.(4) Blower brush (600005)Used for blowing dust from measuring surfaces.• Maintenance kit for gauge blocks includes all the necessary maintenance tools for removing burrs and contamination, and applying anti-corrosion treatment after use.Gauge BlocksLength Standards Brought to You by MitutoyoRecommendation for Regular CalibrationGauge blocks are often used to dene a company’s standard of length for manufacturing and as such must be reliable. This means that they need regular calibration to verify accuracy. (The problem of damage or corrosion should be addressed during use and blocks seriously affected must be discarded immediately.) The frequency of calibration depends on the tolerance requirements of the work, the amount of use and conditions under which the gauge blocks are used. The most economical cycle for any particular set of gauge blocks is best determined by studying the calibration history. The table below indicates timings for a typical initial calibration cycle for the various grades of block.As an accredited calibration laboratory, Mitutoyo offers a traceable calibration service for customers’ gauge blocks. Our regular calibration service features:• Gauge blocks manufactured by any maker can be calibrated.• Cleansing and removal of burrs.• Central dimension and dimensional deviations of each block are measured.• Calibration results are provided for immediate use and for building a calibration history of each block.ApplicationCycle (years)GradeReference standard1 - 2KCalibration2K or 0Inspection20 or 1Shop oor0.5 - 11 or 2516-650E

元のページ  ../index.html#320

このブックを見る