MEASURING INSTRUMENTS CATALOG No.E2019
254/608

D-31DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.CalipersAn industry standard measuring tool• Specially designed for inside measurements in hard-to-reach places.• Digimatic models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.)• Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.• It is necessary for measurement values of 573-645-20 and 573-646-20 to add the correction value to the displayed value.However, the featured offset function enables direct reading of the correction value displayed by pressing the OFFSET switch.ABSOLUTE Inside CaliperSERIES 573, 536 —Knife-edge/Inside Groove/Point Jaw TypeKnife-edge typeSPECIFICATIONSMetric Digimatic modelOrder No.Range (mm)Accuracy (mm)Remarks573-642-2010 - 200±0.05Knife-edge type, Measurable min.573-643-20*110 - 200±0.05Knife-edge type, Measurable min.573-645-20*210.1 - 160±0.05Inside groove type, Measurable min.573-647-20*110.1 - 160±0.05Inside groove type, Measurable min.573-646-20*220.1 - 170±0.05Point jaw type, Measurable min.573-648-20*120.1 - 170±0.05Point jaw type, Measurable min.*1 Without thumb roller*2 Includes the offsetting function, which indicates the actual measurement value. Inch/Metric Digimatic modelOrder No.Range (in)Accuracy (in)Remarks573-742-200.4 - 8±0.002Knife-edge type, Measurable min.573-745-20*20.404 - 6.4±0.002Inside groove type, Measurable min.573-746-20*20.804 - 6.8±0.002Point jaw type, Measurable min.*2 Includes the offsetting function, which indicates the actual measurement value. Metric Analog modelOrder No.Range (mm)Accuracy (mm)Remarks536-14210.1 - 200±0.12Knife-edge type, Measurable min.536-14510.1 - 150±0.05Inside groove type, Measurable min.536-14620.1 - 150±0.05Point jaw type, Measurable min.536-14730.1 - 300±0.08Point jaw type, Measurable min.536-14870.1 - 450±0.10Point jaw type, Measurable min.536-14970.1 - 600±0.12Point jaw type, Measurable min.Technical Data• Accuracy:Refer to the list of specications. (excluding quantizing error for Digimatic models)• Resolution*1:0.01 mm or 0.00005 in/0.01 mm• Graduation*2: 0.05 mm• Display*1:LCD• Scale type*1:ABSOLUTE electromagnetic induction linear encoder• Max. response speed*1: Unlimited• Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)• Battery life*1:Approx. 5 years under normal use• Dust/Water protection level*1: IP67 (IEC 60529)*3 *1 Digimatic models *2 Analog models *3 Rustproong shall be applied after use if caliper was in contact with coolant. Optional Accessories for Digimatic ModelsFor details, refer to page D-38.• Connecting cables for IT/DP/MUX 05CZA624: SPC cable with data button (1 m) 05CZA625: SPC cable with data button (2 m)• USB Input Tool Direct 06AFM380A: SPC cable for USB-ITN-A (2 m)• Connecting cables for U-WAVE-T 02AZD790A: SPC cable with data button (160 mm) 02AZE140A: SPC cable for foot switchWireless Data Output • U-WAVE-TC: 264-620 (IP67 type) 264-621 (Buzzer type)• Connecting unit for U-WAVE-TC: 02AZF310 (IP67 type) Note: IP67 model is water/dust-proofed suitable for the factory oor. Buzzer type is not water/dust-proofed.Refer to page A-15 for details. Note: cannot be used with 573-642-20, 573-643-20 and 573-742-200000045042Inside groove typePoint jaw type573-645-20536-142536-145536-146573-646-20573-642-20Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).Compensation valueCompensation value

元のページ  ../index.html#254

このブックを見る