MEASURING INSTRUMENTS CATALOG No.E2019
245/608

D-22DMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice. Optional accessoriesInterchangeable jaws Surface plate type + Standard typeInside point typeSurface plate type + Centerline typeSurface plate type + Scriber for height gagesScriber typeApplication examples SPECIFICATIONS89810.50.53298033(47)10昔端部裳肴R4.5Scriber for height gagesOrder No.07GZA000Surface plate typeStandard type (right)Inside point type Surface plate typeCenterline type Scriber (arc) Scriber type (right) Scriber type (left) Scriber for height gages Surface plate type 60bøa94.5 b a 0.5 9 b a 9 bø1øa309Centerline TypeOrder No.Componentsab07CZA05707CZA039×2 pcs.30 mm30 mm07CZA06007CZA047×2 pcs.1.2 in1.2 inNote: Entering the appropriate offset value enables the display to indicate the correct measurement value inscribed on the jaws, which should be installed so that this inscription is visible from the display side of the caliper.Standard TypeOrder No.Componentsab07CZA056Right (07CAA044),Left (07CAA045)28 mm(1.1 in)30 mm(1.2 in)Note: 1 setSurface Plate TypeOrder No.ab07CZA04490 mm (3.5 in)28 mm (1.1 in)Scriber TypeOrder No.Componentsab07CZA055Right (07CZA042),Left (07CZA043)8 mm30 mm07CZA061Right (07CZA042),Left (07CZA049)031 in1.2 inInside Point TypeOrder No.Componentsab07CZA05807CZA041×2 pcs.25 mm50 mm07CZA05907CZA048×2 pcs.1 in2 inStandard typeSurface Plate TypeInside point typeScriber TypeCenterline TypeScriber for height gagesUnit: mmTypeApplicable calipersRangeAccuracy when attached to the caliperStandard type552-181-10 (552-191-10)0 - 450 mm (0 - 18 in)±0.06 mm (±0.0025 in)552-182-10 (552-192-10)0 - 600 mm (0 - 24 in)552-183-10 (552-193-10)0 - 1000 mm (0 - 40 in)±0.07 mm (±0.0030 in)552-184-10 (552-194-10)0 - 1500 mm (0 - 60 in)±0.11 mm(±0.0045 in)552-185-10 (552-195-10) 0 - 2000 mm (0 - 80 in)±0.14 mm (±0.0055 in)Inside point type552-181-10 (552-191-10)Inside: 50.1-500 mm (2.004 - 20 in)±0.09 mm (±.0035 in)Outside: 0 - 450 mm (0 - 18 in)552-182-10 (552-192-10)Inside: 50.1 - 650 mm (2.004 - 26 in)Outside: 0 - 600 mm (0 - 24 in)552-183-10 (552-193-10)Inside: 50.1 - 1050 mm (2.004 - 42 in)±0.10 mm (±0.0040 in)Outside: 0 - 1000 mm (0 - 40 in)552-184-10 (552-194-10)Inside: 50.1 - 1550 mm (2.004 - 62 in)±0.14 mm (±0.0055 in)Outside: 0 - 1500 mm (0 - 60 in)552-185-10 (552-195-10)Inside: 50.1-2050 mm (2.004 - 82 in)±0.17 mm (±0.0070 in)Outside: 0 - 2000 mm (0 - 80 in)Centerline type 552-181-10 (552-191-10)30.1 - 480 mm (1.204 - 19.2 in)±0.08 mm (±0.0030 in)552-182-10 (552-192-10)30.1 - 630 mm (1.204 - 25.2 in)552-183-10 (552-193-10)30.1 - 1030 mm (1.204 - 41.2 in)±0.09 mm (±0.0035 in)552-184-10 (552-194-10)30.1 - 1530 mm (1.204 - 61.2 in)±0.13 mm (±0.0055 in)552-185-10 (552-195-10)30.1 - 2030 mm (1.204 - 81.2 in)±0.16 mm (±0.0065 in)Scriber type 552-181-10 (552-191-10)30.1 - 480 mm (1.204 - 19.2 in)±0.10 mm (±0.0040 in)552-182-10 (552-192-10)30.1 - 630 mm (1.204 - 25.2 in)552-183-10 (552-193-10)30.1 - 1030 mm (1.204 - 41.2 in)±0.11 mm (±0.0045 in)552-184-10 (552-194-10)30.1 - 1530 mm (1.204 - 61.2 in)±0.15 mm (±0.0060 in)552-185-10 (552-195-10)30.1 - 2030 mm (1.204 - 81.2 in)±0.18 mm (±0.0070 in)Surface plate type+Scriber type for height gages 552-181-10 (552-191-10) 0 - 450 mm (0 - 17.7 in)±0.10 mm(±0.0040 in)552-182-10 (552-192-10)0 - 600 mm (0 - 23.7 in)552-183-10 (552-193-10) 0 - 1000 mm (0 - 39.4 in)±0.11 mm (±0.0045 in)552-184-10 (552-194-10)0 - 1500 mm (0 - 59.4 in)±0.15 mm (±0.0060 in)552-185-10 (552-195-10)0 - 2000 mm (0 - 79.6 in)±0.18 mm (±0.0070 in)Surface plate type +Inside point type 552-181-10 (552-191-10)Inside: 60 - 450 mm (1.004 - 19 in)±0.12 mm (±0.0050 in)Outside: 0 - 450 mm (1 - 18 in)552-182-10 (552-192-10)Inside: 60 - 600 mm (1.004 - 25 in)Outside: 0 - 600 mm (1 - 24 in)552-183-10 (552-193-10)Inside: 60 - 1000 mm (1.004 - 41 in)±0.13 mm (±0.0055 in)Outside: 0 - 1000 mm (1 - 40 in)552-184-10 (552-194-10)Inside: 60 - 1500 mm (1.004 - 62 in)±0.17 mm (±0.0070 in)Outside: 0 - 1500 mm (1-60 in)552-185-10 (552-195-10)Inside: 60 - 2000 mm (1.004 - 81 in)±0.20 mm (±0.0080 in)Outside: 0 - 2000 mm (1 - 80 in)Surface plate type+Centerline type 552-181-10 (552-191-10)15 - 465 mm (0.6 - 18.6 in)±0.11 mm (±0.0045 in)552-182-10 (552-192-10)15 - 615 mm (0.6 - 24.6 in)552-183-10 (552-193-10)15 - 1015 mm (0.6 - 40.6 in)±0.12 mm (±0.0050 in)552-184-10 (552-194-10)15 - 1515 mm (0.6 - 60.6 in)±0.16 mm (±0.0065 in)552-185-10 (552-195-10)15 - 2015 mm (0.6 - 80.6 in)±0.19 mm (±0.0075 in)( ): Inch/Metric models2550ø1ø55354.5(17)89The above combinations are examples only. Contact us for advice on accuracy when using a contact point in a combination other than as shown above.

元のページ  ../index.html#245

このブックを見る