N-6NMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Helical scanGasket scanSweep scanAirfoil section scanStandard CNC CMMMICROCORD CRYSTA-Apex EX 1200R Series• CRYSTA-Apex EX 1200R series products are advanced CNC CMMs equipped with the REVO probe head and a choice of probes to create a range of standard 5-axis measuring machines.• Two types of probes are supported: RSP2 for 5-axis scanning and SP25M type RSP3 probe allowing use of a cranked stylus. Automatic changeover of these probes with an auto probe changer is possible, enabling fully automated measurement of parts with diverse shapes.• Allows ultra high-speed 5-axis scanning (max. 500 mm/s), far surpassing conventional 3-axis control. Support for high-speed sampling of up to 4,000 points per second allows acquisition of densely spaced measurement points, even during fast scanning.• Internal implementation of laser sensing technol-ogy ensures high-accuracy measurement, even with long styli (up to 500 mm*). * Distance from probe rotation center to stylus tip • 5-axis operation reduces the time required for probe repositioning movements and allows more exible positioning. This also facilitates access to complex workpieces and saves time during both programming and measurement.• Probe calibration of RSP2 requires only about 20 minutes to enable use of the full angular range. Compared to conventional scanning probes, this reduces preparation time.CRYSTA-Apex EX 121210R/122010R/123010R Series Installation TemperatureCRYSTA-Apex EX 121210R/122010R/123010R Series Accuracy Unit: μmProbe usedMax. permissible length measurement errorISO 10360-2:2009REVO+RSP2+RSH250E 0, MPE=2.9+4L/1000 (Temperature environment1)E250, MPE=2.9+4L/1000 (Temperature environment1)E 0, MPE=2.9+5L/1000 (Temperature environment2)E250, MPE=2.9+5L/1000 (Temperature environment2)REVO+RSP3-3+RSH-3E 0, MPE=2.5+3L/1000 (Temperature environment1) E150, MPE=2.5+3L/1000 (Temperature environment1)E 0, MPE=2.5+4L/1000 (Temperature environment2) E150, MPE=2.5+4L/1000 (Temperature environment2)* L=Measuring length (unit: mm)* Table at right defines temperature environments 1 and 2Temperature environment 1Temperature environment 2Limits within which accuracy is guaranteedTemperature Range18 - 22 °C16 - 26 °CRate of change2 °C per hour or less2 °C in 24 hours or less2 °C per hour or less5 °C in 24 hours or lessGradient1 °C or less per meter1 °C or less per meter Rotation angle (Resolution)Vertical (A-axis)-5° to +120° (0.08sec)Horizontal (B-axis)∞ (0.08sec)Maximum stylus length500mm (Distance from probe rotation center to stylus tip)Specification of REVO Scanning ProbeModel Items CRYSTA-Apex EX 121210RCRYSTA-Apex EX 122010RCRYSTA-Apex EX 123010RMeasuring rangeX axis1200mmY axis1200mm2000mm3000mmZ axis960mmDrive speedCNC MODEDrive speed 8 - 300mm/sMeasuring Speed 1 - 5mm/sJ/S MODE0 - 80mm/s (J/S Mode: High Speed)0 - 3mm/s (J/S Mode: Low Speed) 0 - 3mm/s (J/S Mode: Touch Speed)Drive acceleration375mm/s²Resolution0.0001mm (0.1µm)Guide methodAir bearings on each axisTable loadingMaximum height1160mmMaximum mass2000kg2500kg3000kgMass (including the control device and installation platform)4050kg6150kg9110kgAir supplyPressureCMM: 0.4MPa REVO: 0.5MPaConsumption150 L/min under normal conditions (air source: 230 L/min or more), 0.6MPa or moreNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.SPECIFICATIONSCRYSTA-Apex EX 123010R


page 639