MEASURING INSTRUMENTS CATALOG No.E2016
L-22LMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Refer to the Contracer CV-3200/4500 series (Catalog No.E15010) for more details.• CV-4500 series are contour measuring instruments equipped with a high-precision arc scale and newly designed arm on the Z1 axis (detector). The high-precision arc scale can directly read the arc track of the stylus tip to achieve high accuracy and resolution. The new arm has extended the Z1-axis measuring range by 10 mm while reducing the chance of interference with workpieces compared to conventional models. The arm mount can be attached/detached with a single touch on the magnet joint for improved ease of operation.• The following two features have been added exclusively for the CV-4500 series.(1) Continuous measurement in the vertical direction (up/down) is available in combination with a double-sided conical stylus. Up/down continuous measurement data facilitates the analysis of the effective diameter of screw threads, which has been difcult to measure in the past.(2) The measuring force can be set in the FORMTRACEPAK software. Weight replacement and position adjustment are not required to adjust the measuring force.• The 700mm Z2-axis (column) range models are new to the lineup.Dramatically Improved High-Precision Contour Measuring Instruments.CV-4500S4Contracer CV-4500SERIES 218 — Contour Measuring InstrumentsZ1-axis measuring range has been extended by 10mm.• CV-4500 (conventional model)• CV-450050mm10 mm60mm19 mmDownward (Bottom plane) measurementUpward/downward measurement direction is switchable on the softwareUpward (Top plane) measurementMeasuring directionSPECIFICATIONSModel No.CV-4500S4CV-4500H4CV-4500W4CV-4500L4CV-4500S8CV-4500H8CV-4500W8CV-4500L8Measuring rangeX axis100mm200mmZ1 axis (detector)60mm (±30mm from the horizontal)Z2-axis (column) moving range300mm500mm700mm300mm500mm700mmZ1 axis (Detector)Scale typeArc Resolution0.02µmStylus up/downArc motionMeasuring directionForward / backward Face of stylusVertical direction (up/down, available for continuous measurement)Measuring force10, 20, 30, 40, 50mN (switching on the software)Traceable angleAscent: 77°, descent: 83° (using the standard one-sided cut stylus*1 provided anddepending on the surface roughness) Drive unitScale typeX axisSeparate type linear scaleZ2 axis (column)ABS scaleResolutionX axis0.05 µmZ2 axis (column)1 µmDrive speedX axis0 to 80mm/s or manual operationZ2 axis (column)0 to 30mm/s or manual operationMeasuring speedX axis0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 5.0, 10, 20mm/sStraightness*2X axis0.8µm/100mm2µm/200mmInclination rangeX axis±45°Accuracy (20°C)X axis±(0.8+0.01L)µm L = traverse length (mm)Wide range: 1.8µm/100mmNarrow range: 1.05µm/25mm±(0.8+0.02L)µm L = traverse length (mm)Wide range: 4.8µm/200mmNarrow range: 1.3µm/25mmZ1 axis (detector)±(0.8+|2H|/100)μm H = probing height from the horizontal (mm)External dimensions(W×D×H)Main unit*3756×482× 966mm756×482× 1166mm1156×482 ×1176mm1156×492 ×1436mm766×482 ×966mm766×482 ×1166mm1166×482 ×1176mm1156×492 ×1436mmMassMain unit140kg150kg220kg270kg140kg150kg220kg270kg*1: SPH-71 (No.354884)*2: In X-axis horizontal position*3: Base material of the main unit is Gabbro.Note: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.An inspection certicate is supplied as standard. Refer to page X for details.