G-23GLinear GageIdeal for integration into harsh environments such as automation applicationsMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.SERIES 542 Linear Gage Counter (Panel-mount, Multi-function Type)EB Counter•Produces 3-step/5-step, 7 kinds of tolerance output and limit value output independently for each of 7 channels.•Comes with serial BCD output capability, for connection to a programmable controller or personal computer, etc.•Dynamic measurement possible with simplied analog output.•Employs DIN size (96×48mm) and mount-on-panel conguration to facilitate system integration.542-092-2542-094-2542-093-2EB-11ZEB-11PEB-11DFunction• Preset• Tolerance judgment output (3/5-step, 7 kinds)• Limit value output (2 kinds independently for each of the 7 channels)• Peak (max., min., runout) measurement• Diverse data output(Serial BCD, Simplied analog, Digimatic)Optional Accessories• I/O output connector (with cover): 02ADB440• AC adapter: 02ADN460• AC cable (Japan): 02ZAA000*• AC cable (USA): 02ZAA010*• AC cable (EU): 02ZAA020*• AC cable (Britain): 02ZAA030*• AC cable (China): 02ZAA040*• AC cable (Korea): 02ZAA050*• Terminal connecting cable: 02ADD930** Required when using AC adapter.• External switch boxThe tolerance values or preset values can be easily input.02ADF180 (with 2m cable)Refer to the Linear Gage (Catalog No.E13007) for more details.SPECIFICATIONSOrder No.542-092-2542-094-2542-093-2Quantizing error±1 countMaximum input frequency1.25MHz (2-phase square wave), response speed depends on gage specification.Response speed depends on gage specification.Resolution( ) indicates maximum display range0.01mm (±9999.99mm) / .0005" (±99.9995")0.005mm (±9999.995mm) / .00005" (±9.99995")0.001mm (±999.999mm) / .00005" (±9.99995")0.0005mm (±99.9995mm) / .000005" (±.999995")0.0001mm (±99.9999mm) / .000005" (±.999995")0.01mm (±9999.99mm) / .0005" (±99.9995")0.005mm (±9999.995mm) / .00005" (±9.99995")0.001mm (±999.999mm) / .00005" (±9.99995")0.0005mm (±99.9995mm) / .000005" (±.999995")0.0001mm (±99.9999 mm) / .000005" (±.999995")DisplaySign plus 6 digits (Green LED)Tolerance judgment displayLED display (3 steps: Amber, Green, Red / 5 steps: Amber, Amber flashing, Green, Red flashing, Red)Input/outputTolerance judgment outputL1 to L5, open-collectorControl outputNormal operation signal (NOM), open-collectorControl inputPresetting, display hold, peak value clear, tolerance judgment BANK switch, open-collector or no-voltage contact signal (with/without contact point)InterfaceSerial BCDBit serial format, open-collectorAnalog output2.5V+Counting value× Voltage resolution (25mV/2.5mV): Full-scale 0 to 5VDigimatic input/output • Connecting to the external switch box (02ADF180) makes it easy to enter tolerance limits and preset values. Note) This function is not available when the gage is connected to DP-1VR, Digimatic Mini-Processor. • It can only be connected to DP-1VR Digimatic Mini-Processor (264-504). • Number of tolerance steps can be expanded by assembling EB-D counters.RatingPower supply voltage12 - 24V DCPower consumption6W or less (50mA max.)Ensure at least 1A is available per unit.Operating temperature range0 to 40°C (RH 20 to 80%, no condensation)/ –10 to 50°C (RH 20 to 80%, no condensationExternal dimensions96(W)×48(H)×156(D)mmApplicable gage headLGF, LGK, LGE, LGBModels with reference point mark, sine wave output type are excluded.LGF with reference point markLGS, LGD, LGD-MApplicable inputDifferential square-waveDifferential square-wave with origin point markDigimatic code (SPC)Number of gage inputs1MassApprox. 400gApprox. 400gApprox. 400gUnit: mmDIMENSIONS137(11)6.691.444.496154.64896BANKFnEB-□P.SETMODE******INPUT+VDC IN 12-24V 500mA-VOUTPUTUNITMAXMINTIRL1L7+/-BANK137(11)6.691.444.496154.64896BANKFnEB-□P.SETMODEUNITMAXMINTIRL1L7+/-BANK137(11)6.691.444.496154.64896BANKFnEB-□P.SETMODEUNITMAXMINTIRL1L7+/-BANK


page 454