F-3FMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.• Solar poweredAn environmentally friendly measuring instrument that does not require batteries, eliminating the hassle and cost of battery replacement. Can operate under minimum light conditions of 40 lux—lower than the level in a warehouse.• Built-in rechargerThe large-capacity built-in reservoir capacitor allows you to use the indicator for long periods of time under light conditions below the minimum level.*• User-friendly buttonsAll functions can be accessed by using the two or three large buttons on the front of the indicator.• Origin recorded even if display disappears.The indicator includes an ABS (absolute) sensor that allows the previously set origin to be restored even if the display disappears due to insufcient light, making it easy to resume measurement. This feature makes ID-SS ideal for long-time or multi-point measurement.ABSOLUTE Solar-Powered Digimatic Indicator ID-SSSERIES 543Digimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.543-500• ID-SS can be used in standard work environments. The following is excerpted from JIS Z9110:2010 General rules of recommended lighting levels; 5.4 Factories:Luminance (lux)Location (permissible work)1500Very detailed visual work750Detailed visual work; design and drawing work500Regular visual work such as work carried out in a factory; monitoring work such as using instrument panels and control panels300Administrative work carried out in a warehouse200Control rooms, bathrooms, and places where manual light work is carried out150Work such as loading, unloading, and shifting loads100Hallways, corridors, entrances and exits, and warehouses50Indoor emergency staircasesTechnical DataDisplay: 6-digit LCD and signScale type: ABSOLUTE electrostatic linear encoderMeasuring force:1.5 N or lessUsable positions:AllPower supply:Solar battery (for indoor use)Minimum Operating light: 40 luxNote: A built-in reservoir capacitor allows a fully charged ID-SS to be used for about 3.5 hours under light conditions below the minimum level. The charging time differs depending on the environment, but it usually takes about 1.5 hours for a fully discharged ID-SS to fully recharge under light conditions of 500 lux.Maximum response speed:No limit (scan-type measurement is not supported)Stem dia: 8mm (ISO/JIS type) or 3/8"(ANSI/AGD type)FunctionsOrigin set (zero-set)Count direction switchinginch/mm conversion (inch/mm models)Data outputAlarm: Counting value composition error Insufcient illumination intensity or changeOptional accessoriesLifting leverLifting knobLifting releaseOptional Accessories• Lifting Lifting leverNo.21EZA198 (ISO/JIS/DIN Type), No.21EZA199 (ASME/ANSI/ AGD Type) Lifting knobNo.21EZA105 (ISO/JIS/DIN Type), No.21EZA150 (ASME/ANSI/ AGD Type) Lifting cable (No. 540774)• SPC Cable: No.905338 (1m) No.905409 (2m)• USB Input Tool Direct (2m) : 06ADV380F• Connecting Cables for U-WAVE-T (160mm): No.02AZD790F For footswitch 02AZE140F Refer to page F-60 for details.• Digimatic Mini-Processor DP-1VR: 264-504• Contact points for Mitutoyo’s dial indicators (Refer to pages F-51 to F-54 for details.) Interchangeable backs for 2 series (Refer to page F-55 for details.)• Measuring stands (Refer to page F-79 to F-85 for details.)DimensionsM2.5x0.45Sø31721.613.3ø10.946.521.27.3ø8 0-0.0097.6ø54ø5954.450.120516ø6.5Unit: mmISO/JIS TypeNote 1:Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.Note 2:Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.An inspection certicate is supplied as standard. Refer to page X for details.SPECIFICATIONSMetricOrder No.RangeResolutionAccuracyRemarksOverall*Hysteresis*Repeatability*543-50012.7mm0.001mm0.003mm0.002mm0.002mmWith lug543-500BFlat543-5050.01mm0.02mm0.02mm0.01mmWith lug543-505BFlatInch/MetricOrder No.RangeResolutionAccuracyRemarksOverall*Hysteresis*Repeatability*543-501.5”.00005”/0.001mm±.0001”/0.003mm.0001”/0.002mm.0001”/0.002mmWith lug543-501BFlat543-502With lug543-502BFlat543-506.0005/0.01mm±.0010”/0.02mm.0010”/0.02mm.005”/0.01mmWith lug543-506BFlat543-507With lug543-507BFlat* Quantizing error of ±1 count is excluded.ISO/JIS typeASME/ANSI/AGD type(Refer to page X for details.)


page 344