MEASURING INSTRUMENTS CATALOG No.E2016
D-43DMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.• Double-column structure ensures high measuring accuracy.• Ergonomic base ts comfortably in the hand. • Bidirectional touch-trigger probe is available as an optional accessory. • Character height of the LCD display has been increased (10mm to 11mm) and a high-contrast LCD display unit adopted, so that the readability is improved.• Inclined handle improves slider ergonomics.• Allows integration into statistical process control and measurement systems.Refer to page A-3.• Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory)• Battery life is 3,500 hours in continuous use.• Carbide-tipped long scriber (No. 905200 with overall length of 150mm) is provided as a standard accessory. (Standard accessory: scriber cramp No. 05GZA033)• For precision Black Granite Surface Plates, refer to page E-51.Digimatic Height GageSERIES 192 — Multi-function Type with SPC Data Output192-663-1010°Height GageA standard measuring tool of industrySPECIFICATIONSMetricOrder No.RangeResolutionAccuracy*RepeatabilityMax. response speedHeightMass192-663-100 - 300mm0.01mm(0.005mm) ±0.02mm0.01mm500mm/s510mm5.7kg192-664-100 - 600mm±0.04mm802mm8.3kg192-665-100 - 1000mm±0.06mm1228mm15.7kg* Excluding quantizing errorInch/MetricOrder No.RangeResolutionAccuracy*RepeatabilityMax. response speedHeightMass192-670-100 - 12".0005"/0.01mm (.0002" /0.005mm)±.001"0.01mm500mm/s510mm5.7kg192-671-100 - 18"±.0015"649mm7.5kg192-672-100 - 24"±.0015"802mm8.3kg192-673-100 - 40"±.0025"1228mm15.7kg* Excluding quantizing error1501501305050(20)(20)70Preset 2(150mm)Preset 1(50mm)• Example of preset 1 To measure a height of 70mm, with a reference plane height of 50mm• Example of preset 2 To measure a height of 130mm, with a reference plane height of 150mmPush the small ne-adjustment knob in to disengage gearing and then turn the large wheel. Low-voltage alert:When battery voltage becomes low, a warning appears in the display.Probe-tip diameter compensation:An adjustment is applied to the raw measurement data to compensate for the effect of the size of the spherical contact point used by the bidirectional touch-trigger probe.Pull the ne-adjustment knob out to engage gearing and then turn this knob, which then slowly turns the wheel.FunctionsOrigin-setting (ABS measurement mode): Any arbitrary value can be stored as the origin point.Zero-setting (INC measurement mode):Displayed value can be set to zero at any arbitrary position of the slider.Origin restoration:Previously set origin is restored when switching back to ABS mode. Presetting (ABS INC measurement mode):Displayed value can be set to any arbitrary value, including negative values. Measuring directionMeasuring direction can be switched at the press of a button.Data holdDisplay value can be held. Reverts to ABS or INC mode when cancelled.Alarm: Error message is displayed when overow or overspeed of displayed value arises and measurement is stopped.Data output: Allows integration into statistical process control and measurement systems. (Refer to page A-3.)Fine and coarse height adjustment through knob and wheel combination.Slider height adjustment wheel allows ne and coarse height adjustment.Presetting (2 positions) With two preset functions, two reference heights can be used relative to a surface plate. Fine adjustmentCoarse adjustmentPower ON/OFF buttonZero set/ABS buttonPreset/ probe-tip-diameter compensation mode buttonButton used when presetting and compensating probe tip diameterButton used when presetting measuring direction and compensating probe-tip diameterHeight-adjustment wheelHold/data button* Probe-tip-diameter compensation mode is a function provided for Order No. 192-663-10/192-664-10/192-665-10/192-670-10/ 192-671-10/192-672-10/192-673-10.