C-26CMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.• The Inside Micro Checker is designed to act as a setting standard for inside micrometers.• Each measuring block is made of zirconia-based ceramic and it is free from deterioration and dimensional changes over time.Inside Micro CheckerSERIES 515Support clamps940286* PairAuxiliary block 10mm 2pcs.Collar602195 2pcs.Clamp screwdriver600324 1pc.* Order No. is equivalent to a pair (2pcs.)Standard accessory setApplication– The two auxiliary gauge blocks are held against the appropriate measuring blocks by the support clamps, which also provide accurate location for the inside micrometer by means of the V-grooved extensions.Optional accessories• Wooden boxFor 515-585: 602160For 515-586: 602163An inspection certicate is supplied as standard. Refer to page X for details.SPECIFICATIONSOrder No.Length to checkBlock pitch accuracy515-58525-300mm±(1+L/150) μm L: Length to check (mm)515-58625-600mmPlease note that the bottom surface and the contact faces are not perpendicular to each other.DIMENSIONSUnit: mm515-585 CI-300C5075100125150175200225250275300025515034061364505236434066464050636352515-586 CI-600C515-585 CI-300C02550751001251501752002252502753000507510012515025475500525550575600単位:mm515-585


page 195