B-57BMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Snap Meters SERIES 523• Suited to the measurement of mass-produced parts. • Various types of indicator can be selected according to the measurement application. • Measuring faces: Carbide DIMENSIONSUnit: mm523-141(Indicator: optional)AccuracyFlatness: 0.3μm/.000012”Parallelism: 0.6μm/.000024” for models up to 50mm/2” 1μm/.00004” for models over 50mm/2” Repeatability of indication: 0.4μm/.00002”Typical Indicators used with gageID-C (0.001mm)/ 543-390BLGF-L (0.0001mm)/ 542-181 & Counter 542-015MicrometerThe origin of Mitutoyo’s trustworthy brand of small tool instrumentsABS Digimatic IndicatorLinear Gage and counter optionWork-stopperRangeDial indicator holding diameter88.811.5dbø10.8ø8+0.0150ø1689.5SPECIFICATIONSMetricOrder No.RangeAnvil movementMeasuring force*Mass523-1410 - 25mm2mm5 - 10N710g523-14225 - 50mm810g523-14350 - 75mm920g523-14475 - 100mm1050gInchOrder No.RangeAnvil movementMeasuring force*Mass523-1510 - 1".078"5 - 10N710g 523-1521" - 2"810g523-1532" - 3"920g523-1543" - 4"1050g* Measured at the position where the anvil is retracted by 1mm from the free position without installing the indicator. Rangebd0 - 25mm253125 - 50mm355650 - 75mm478175 - 100mm60106


page 110