6-3Specifications553-100CLASS 2IEC 60825-1:2014, EN 60825-1:2014+A11:2021CLASS 2 (JIS C 6802: 2014)Order No.Maximum measuring widthMeasuring rangeWorking distanceScanning error (1σ) *1Frame rateLaser classLine laserMassOperating environmentStorage environmentIP codePower supply (power consumption)*1 Accuracy inspection environment: Temperature 20 ℃±1 ℃, Humidity 50%RH±10%RH *2 Measuring accuracy may deteriorate if any water droplet or dust particle adheres to the optical path.Measurement workpieces: Specified reference ball for inspection (ф30 mm) Inspection method: Determined by Mitutoyo-specified inspection method. The operating environment and the storage environment are different from the guaranteed accuracy environment.• The sensor itself is guaranteed for an accuracy of 20 µm and a Z repeatability of 0.5 µm. It has also achieved the IP67 protection level, providing stable measurements.• The SurfaceMeasure1008S can obtain the profiles and three-dimensional shapes of measurement workpieces at high speed (a maximum frame rate of 10 kHz) and make an automatic judgement inside the sensor.• It is equipped with a parts matching function that allows the measurement tool to be applied throughout, regardless of the orientations of the parts being measured. Measurements can be taken without performing alignment.• The software supports intuitive operation and is built into the sensor (software installation is not required), so you can use it immediately after mounting.Laser mediumWavelengthMax. outputTemperatureHumidityTemperatureHumidity100 mm 80 mm 80 mm 20 µm Max. 10 kHz EN / IECJISSemiconductor laser405 nm (visible)2.2 mW650 g0 ℃ to 40 ℃RH 20 to 80%, non-condensing-30 ℃ to 70 ℃RH 20 to 95%, non-condensingIP 67 *224 to 48 VDC (15 W)Non-contact Line-laser SensorSurfaceMeasure1008S
元のページ ../index.html#272