L-11Mitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.LFormtracerHybrid machine with dual-role capabilitySPECIFICATIONSModel No.FTA-S4D3000FTA-H4D3000FTA-W4D3000FTA-L4D3000FTA-S8D3000FTA-H8D3000FTA-W8D3000FTA-L8D3000FTA-S4D4000FTA-H4D4000FTA-W4D4000FTA-L4D4000FTA-S8D4000FTA-H8D4000FTA-W8D4000FTA-L8D4000Surface roughness measurementMeasuring rangeX axis100 mm200 mmZ1 axis 800 µm, 80 µm, 8 µmStraightness (when the X axis is horizontal)(0.05+0.001L) µm L = Measurement Length (mm)(0.1+0.002L) µm L = Measurement Length (mm)Contour measurementMeasuring rangeX axis100 mm200 mmZ1 axis 60 mm (±30 mm in horizontal situation)Straightness (when the X axis is horizontal)0.8 µm/100 mm2 µm/200 mmAccuracy (20 °C)D3000X axis(0.8+0.01L) µm L = Measurement Length (mm)(0.8+0.015L) µm L = Measurement Length (mm)Z1 axis (detector unit)±(1.2+|2H|/100) µm H = Measurement height from the horizontal position (mm)D4000X axis(0.8+0.01L) µm L = Measurement Length (mm)(0.8+0.015L) µm L = Measurement Length (mm)Z1 axis (detector unit)±(0.8+|2H|/100) µm H = Measurement height from the horizontal position (mm)Common specificationsX-axis inclination angle±45°Z2-axis (column) travel range300 mm500 mm700 mm300 mm500 mm700 mmBase size (W×D)600×450 mm1000×450 mm600×450 mm1000×450 mmBase materialGraniteNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.Remote box with user-friendly operabilityDetectorDetector holder (optional)Large sized base models and high-column models are added to the line-up.FTA-S4D3000(Detector for surface roughness measurement attaching example, Inclined drive unit, with monitor arm)FTA-S4D3000(Detector for form/contour measurement attaching example, Inclined drive unit, with monitor arm)Connecting cables are contained within the measuring instrument.For D3000For D4000An inspection certicate is supplied as standard. Refer to page U-9 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).FORMTRACER Avant D3000/4000 SeriesSERIES 525 — Surface Texture Measuring InstrumentsInclined drive unitRefer to the FORMTRACER Avant Series Brochure(E15030) for more details.Catalog No. E15030Contour and Surface Roughness Measuring Systems FORMTRACER Avant SeriesForm MeasurementFORMTRACER_Avant_E_CC2015.indd 12019/09/25 15:54• FORMTRACER Avant D3000/4000 Series are highly functional and user-friendly surface texture measuring systems with innovative design features. Both surface roughness measurement and contour measurement are available on a single system just by replacing the detector.• The contour/roughness detector can be replaced without turning off the controller power and without using any tool. Furthermore, the detector is recognized automatically.• FORMTRACER Avant D Series comes with the inclined drive unit as standard, making approach to the target surface and measurement of large workpieces much easier.• Equipped with an operability focused, new style remote box. The new part program key strongly supports manual part-programming.• High throughput is achieved thanks to high drive speed (X axis: Max. 80 mm/s, Z2 axis: Max. 30 mm/s) and acceleration (X axis: 30 mm/s2).• All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.• The Z1-axis detector is equipped with a built-in anti-collision safety device.• The arm of the detector for contour measurement is a magnetic, one-touch, detachable mechanism.• D4000 type is a highly functional contour measuring system with a digital detector (measuring range: 60 mm) that enables wide range measurement, top/bottom plane continuous measurement function, automatic variable measuring force function, and stylus drop detection function.
元のページ ../index.html#538