MEASURING INSTRUMENTS CATALOG No.E2016
79/682

B-26BMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Screw Thread Micrometers SERIES 125 • Fixed anvil type to suit 60º threads• Directly indicates screw pitch diameter (no need for calculation)• Equipped with Ratchet Stop for constant measuring force.DIMENSIONSUnit: mmNo.125-101,125-106No.125-111,125-11647173d13.814.54.932.3ø18ø6.35bø9.7455047314.5d1732.34.7bø6.35ø18ø9.7Technical dataAccuracy:±(2+R/75)μm, R = max. range (mm) fraction rounded upStandard accessories: Spanner (301336), 1 pc125-103SPECIFICATIONSMetricOrder No.Thread to be measured(Metric/Unied)RangeGraduation125-1010.4 - 0.5mm/64 - 48TPI0 - 25mm0.01mm125-1020.6 - 0.9mm/44 - 28TPI125-1031 - 1.75mm/24 - 14TPI125-1042 - 3mm/13 - 9TPI125-1053.5 - 5mm/8 - 5TPI125-1060.4 - 0.5mm/64 - 48TPI25 - 50mm125-1070.6 - 0.9mm/44 - 28TPI125-1081 - 1.75mm/24 - 14TPI125-1092 - 3mm/13 - 9TPI125-1103.5 - 5mm/8 - 5TPIMetricOrder No.Thread to be measured(Metric/Unied)RangeGraduation125-1110.6 - 0.9mm/44 - 28TPI50 - 75mm0.01mm125-1121 - 1.75mm/24 - 14TPI125-1132 - 3mm/13 - 9TPI125-1143.5 - 5mm/8 - 5TPI125-1155.5 - 7mm/4.5 - 3.5TPI125-1160.6 - 0.9mm/44 - 28TPI75 - 100mm125-1171 - 1.75mm/24 - 14TPI125-1182 - 3mm/13 - 9TPI125-1193.5 - 5mm/8 - 5TPI125-1205.5 - 7mm/4.5 - 3.5TPI* A setting standard is supplied with each model (except for 0-25mm measuring range). The setting standard is for metric threads (unied) 60°.Rangebd0 - 25mm2537.225 - 50mm3262.2Rangebd50 - 75mm498775 - 100mm63112

元のページ 

page 79

※このページを正しく表示するにはFlashPlayer10.2以上が必要です