MEASURING INSTRUMENTS CATALOG No.E2016
653/682

N-20Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.NRefer to the Probes for Coordinate Measuring Machines leaet (Catalog No.E16005) for more details.Touch-trigger probeProbe headPH10M/10MQMotorized probe head The probe allows automatic control of positioning (up to 720 directions) of the mounted probe. It is possible to mount not only a touch-trigger probe but also any scanning probe, vision probe, laser probe, screw thread depth probe, etc. Auto-changing is available (optional).▲ Mounting example of touch-trigger probeTP7MHigh accuracy touch-trigger probeThis high-accuracy touch-trigger probe has high repetitive accuracy of 2σ≦ 0.25µm. A long stylus up to 150mm can be installed.TP200Compact high-accuracy touch-trigger probe This compact, high accuracy, touch-trigger probe is ø13.5mm outside diameter.Styli auto-changing (optional) is supported.TP20Compact touch-trigger probe This compact, touch-trigger probe is ø13.2mm outside diameter. Styli auto-changing (optional) is supported when mounted on a CNC CMM.PH1MH20UMAP-CMMPH20Touch-trigger probe equipped with manual probe head This touch-trigger probe equipped with manual probe head is designed for use with manual CMMs. The probe head section can be manually positioned to the desired orientation.Micro touch probe A stylus with an ultra-small diameter of ø0.1mm or ø0.3mm can be used.Measurement of miniscule form by mounting on the PH10MQ.5-axis control touch-trigger system Thanks to the unique "head touches", it is possible to measure by movement of the probe head instead of coordinate measurement. Also, measuring time can significantly be shortened by means of 5-axis concurrent control and stepless positioning angle. MH20iTouch-trigger probe equipped with manual probe head This touch-trigger probe equipped with manual probe head is designed for use with manual CMMs. The probe head section may be manually indexed to 168 positions. MIHMounting example of touch-trigger probe This probe head allows manual positioning (up to 720 directions) of the mounted probe (for TP200/ TP20/ TP2-5W). A probe extension up to 300mm can be attached. ▲ Mounting example of touch-trigger probeMounting example of touch-trigger probe This manual probe head is designed for use with the TP200/ TP20.It is possible to manually change positioning of the attached probe to the desired orientation. ▲ Mounting example of touch-trigger probe

元のページ 

page 653

※このページを正しく表示するにはFlashPlayer10.2以上が必要です