MEASURING INSTRUMENTS CATALOG No.E2016
641/682

N-8NMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.High Accuracy CNC CMMMICROCORD STRATO-Apex 900/1600 Series• Floor vibration at the installation location, can be a source of variations in measured values. The auto-leveling air spring vibration isolator is included as standard. The vibration isolator insulates the main unit from oor vibrations and can quickly levels the CMM main unit, using a sensor that detects load uctuations caused by axis movement of the CMM or workpiece loading.• All STRATO-Apex high-precision series CMM's are equipped with temperature compensation and therefore do not require a temperature controlled room. Accuracy is guaranteed within the range of 19 to 21°C for 900 Series and the range of 18 to 22°C for 1600 Series. STRATO-Apex 9106STRATO-Apex 900 Series Length measurement error Unit: μmSTRATO-Apex 162012/163012 Length measurement error Unit: μmSTRATO-Apex 162016/163016 Length measurement error Unit: μmStandardProbe usedMax. permissible length measurement error ISO 10360-2: 2009SP25M E0, MPE=0.9+2.5L/1000E150, MPE=0.9+2.5L/1000StandardProbe usedMax. permissible length measurement error ISO 10360-2: 2009SP25M E0, MPE=2.5+4.0L/1000E150, MPE=2.5+4.0L/1000StandardProbe usedMax. permissible length measurement error ISO 10360-2: 2009SP25M E0, MPE=3.0+4.0L/1000E150, MPE=3.0+4.0L/1000* L=Measuring length (unit: mm)STRATO-Apex 163012Model Items STRATO-Apex 9106STRATO-Apex 9166STRATO-Apex 162012STRATO-Apex 162016STRATO-Apex 163012STRATO-Apex 163016Measuring rangeX axis900mm1600mmY axis 1000mm1600mm2000mm3000mmZ axis600mm1200mm1600mm1200mm1600mmMeasuring methodLinear encoderDrive speedCNC MODEDrive speed: From 8 to 300mm/s for each axis (maximum combined speed: 519mm/s)Drive speed: From 8 to 350mm/s for each axis (maximum combined speed: 606mm/s)Measuring speed 1 to 3mm/sJ/S MODEDrive speed 0 to 80mm/sMeasuring speed 0 to 3mm/sFine-positioning speed 0.05mm/sDrive acceleration1500mm/s2 for each axis (maximum combined speed: 2598mm/s2)780mm/s2 for each axis (maximum combined speed: 1350mm/s2)Resolution0.00002mm (0.02µm)0.00005mm (0.05µm)Guaranteed accuracy temperature environmentRange19 to 21°C18 to 22°CRate of changePer hour1.0°CIn 24 hours2.0°CGradientvertical/horizontal1 °C or less per meterGuide methodAir bearings on all axes (static pressure air bearings) Measuring tableMaterialGraniteSize (table surface)1080×1720mm1080×2320mm1850×3280mm1850×4280mmTapped insertM8×1.25Maximum measurable height770mm1350mm1750mm1350mm1750mmMaximum table loading800kg1200kg3500kg4000kgMass (including the vibration-damping platform and controller)2410kg3085kg11150kg11200kg15300kg15350kgPower supply specifications (including the probe option interface)Power supply voltage: AC100-120/200-240V ±10%; power supply capacity: 700 W (of which 170 W is used for the probe option interface)Power supply voltage: AC100-120/200-240V ±10%; power supply capacity: 1500 W (of which 170 W is used for the probe option interface)Air supplyPressure0.4 MPaConsumption60L/min under normal conditions (air source: At least 120L/min)100L/min under normal conditions (air source: At least 250L/min)Note: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.SPECIFICATIONS

元のページ 

page 641

※このページを正しく表示するにはFlashPlayer10.2以上が必要です