MEASURING INSTRUMENTS CATALOG No.E2016
603/682

L-28LMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.•Equipped with a wide range and high resolution Z-axis detector.• Measuring rangeZ1 axis (detector): 5mm (Resolution: 0.0008μm *Applicable when the measuring range is 0.05mm)X axis: 100mm (Resolution: 0.05μm)•Overhang of the detector: Max. 70mm (Fixable at a desired position)•Uses the well-respected FORMTRACEPAK software to provide a rich variety of analysis functions to achieve excellent surface texture evaluation.Formtracer CS-3200S4SERIES 525 — Surface Roughness and Contour Measuring SystemCS-3200S4Refer to the Formtracer CS-3200 (Catalog No.E15025) for more details.SPECIFICATIONSModel No.CS-3200S4Measuring range/ResolutionX axis100mm/0.05µmZ1 axis (detector)5mm/0.08µm0.5mm/0.008µm0.05mm/0.0008µmZ2 axis (column)300mm/1μmAccuracy (20°C)X axis±(0.8+0.01L)µm L= measuring length(mm)Z1 axis (detector)±(1.5+|2H|/100) μm H = probing height from the horizontal (mm)Drive unitStraightness (X axis)Under normal use0.2µm/100mmWhen protruding to the maximum extent0.4µm/100mmMeasuring speedRoughness measurement0.02, 0.05, 0.1, 0.2mm/s (4-step)Contour measurement0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0mm/s (7-step)Drive speedX axis (horizontal direction)0 to 80mm/s or manual operationZ2 axis (vertical direction)0 to 20mm/s or manual operationUp/down movement300mm (motorized)Inclination range±45°DetectorDetection methodDifferential inductanceMeasuring force0.75mNStylusStandard stylus (for roughness/contour measurement)Tip angle: 60° cone, Tip radius: 2μm, Diamond tipCone stylus (for contour measurement)Tip angle: 30° cone, Tip radius: 25μm, SapphireStylus up/down Available (Stoppable at a mid-air position)Note1: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.Note2: High column and 200mm X-axis drive-unit models are also available. Please consult your local Mitutoyo ofce for applicable specications. An inspection certicate is supplied as standard. Refer to page X for details.

元のページ 

page 603

※このページを正しく表示するにはFlashPlayer10.2以上が必要です