MEASURING INSTRUMENTS CATALOG No.E2016
589/682

L-14LMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Optional Accessories for SurftestSV-3200 seriesSV-C3200/4500 series• This table enables automatic alignment of the surface to be measured so that automatic measurement can be implemented.Auto-leveling table• Enables efficient, automatic measurement of multiple aligned workpieces and multiple points on a single table surface.θ2-axis table No.178-078• This rotary table can index a workpiece to practically any required angle for making radial cross-sectional measurements on cylindrical-form workpieces.θ1-axis table No.12AAD975• This rotary table can index a workpiece to practically any required angle for making axial cross-sectional measurements on cylindrical-form workpieces.Y-axis table No.178-097*Leveling table (For D.A.T.)Inclination rangeTabletop size (W×D)Maximum loading Code No.: ±1.5°: 130x100mm: 15kg: 178-048Measuring block for cylindrical workpieces (dedicated to SJ-410)• Block to be directly mounted on a cylindrical workpiece for measurement.Applicable diameterOrder No.: ø15 to 60mm: 12AAB358• Available for use with SJ-410, SJ-500, SV-2100/3200, SV-C3200/4500.3-axes adjusting table• For the high-accuracy surface roughness measurement of a cylindrical workpiece, it is necessary to set the workpiece axis parallel with the measurement axis and to adjust the leveling.• Using the three-axis adjustment table facilitates the adjustment of the alignment and leveling necessary just by following the guidance supplied by the machine. No experience or intuition is required.• Available for the use with SJ-410, SJ-500, SV-2100/3200, SV-C3200/4500.For alignment (Swivel)For Y-axis adjustmentV-blockFor inclination adjustmentCode No.178-047Swivel adjusting angle±2ºInclination adjustment ±1.5ºTravel range of the Y axis±12.5mmMaximum loading15kgMeasurement capacityø1 to ø160mm (using two V-grooves)External dimensions (W×D×H)287×235×150mmMass9kgInclination adjustment ±2ºMaximum loading 7kgDimensions of table (W×D)130×100mmExternal dimensions (W×D×H)140×105×57mmMass3.5kgTravel range200mmResolution0.05µmPositioning accuracy±3µmDrive speed3.5kgMaximum loading 50kgMass28kg* The Y-axis table with this Order No. cannot be used with CNC form measuring instruments. Please order the Y-axis table for those instruments separatelyTravel range360ºResolution0.004ºRotational speed10º/sec (max.)Table diameterø150mmMaximum loading 12kgTravel range360ºResolution0.0072ºRotational speed18º/sec (max.)Table diameterø118mmMaximum loading (loading moment)4kg(343N·cm or less)• Combined with highly sophisticated analysis software (MCubeMap/FORMTRACEPAK-PRO), the 3D/Y-axis table offers the ability to perform advanced 3D surface roughness analysis.• The DAT unit tilts the X-axis unit, enabling easy alignment of the drive axis with the surface to be measured.• Holders that can change the position by hand.3D/Y-axis table No.178-096*DAT unit No.178-040Detector holdersTravel range100mmResolution0.05μmMinimum positioning pitch1µmStraightness accuracy0.3µm/100mmMaximum drive speed20mm/sMaximum loading15kgMass31kg* The Y-axis table with this Order No. cannot be used with CNC form measuring instruments. Please order the Y-axis table for those instruments separatelyHoldersMeasurement postureRemarksS-3000̶Standard accessoryS-3000CCrankOptional accessoryS-3000CRCrank/upwardOptional accessoryS-3000MRUpwardOptional accessory, long typeCrank postureThis DAT unit is for SV-3200 series. It cannot be used with SV-C3200/4500.Upward posture

元のページ 

page 589

※このページを正しく表示するにはFlashPlayer10.2以上が必要です