L-8LMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.SPECIFICATIONSModel No.SJ-500SV-2100M4SV-2100S4SV-2100H4SV-2100W4Standard type(Optional)Manual standMotorized standMeasuring rangeZ1 axis (detector)800µm, 80µm, 8µmX axis50mm100mmStraightness0.2µm/50mm*10.15µm/100mmResolutionX axis0.05µmZ1 axis (detector)0.01µm (800µm), 0.001µm (80µm), 0.0001µm (8µm)Z2 axis (column)̶̶0.1µmDrive speedX axis0 to 20mm/s or manual operation0 to 40mm/s or manual operationZ2 axis (column)̶Manual0 to 20mm/s or manual operationMeasuring speed0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 5.0mm/sUp/down movementConnector unit: 30mm350mm350mm550mmAssessed prolePrimary prole, Roughness prole, Waviness prole, DF prole, Roughness motif prole, Waviness motif proleParameterRa, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv, R3z, Sm, S, Pc, m(rc), δc, mr, tp, Htp, Lo, lr, Ppi, HSC, ∆a, ∆q, Ku, Sk, Rpk, Rvk, Rk, Mr1, Mr2, A1, A2, Vo,λa,λq, R, AR, Rx, W, AW, Wx, WteContour analysisStep (AVE, MAX, MIN), Circle, Angle, Area, Coordinate value margin, inclinationAnalysis graphMaterial ratio curve (BAC), Prole height amplitude distribution curve (ADC), Power spectrum chartData compensation functionsParabola compensation, Hyperbolic compensation, Ellipse compensation, Circle compensation, Conic compensation, Tilt compensation (General/Arbitrary)Filter2CR75, PC75, GAUSS, Robust-SplineCutoff valueλs0.25, 0.8, 2.5, 8, 25, 80, 250µm, no lterλc0.025, 0.08, 0.25, 0.8, 2.5, 8, 25, 80*2mm, no lterλf0.08, 0.25, 0.8, 2.5, 8, 25, 80*2mm, no lterSampling length0.025, 0.08, 0.25, 0.8, 2.5, 8, 25, 80*2mm, no lter LCD SpecicationTouch-screen 7.5" color TFT with backlightBuilt-in printerHigh-speed thermal printer (Paper width: 58mm)Recording magnicationVertical magnication10X to 500,000X, AutoHorizontal magnication0.5X to 10,000X, AutoDetectorDetection methodDifferential inductanceStylus & Measuring force0.75mN stylus tip (cone): Tip taper angle: 60°, Tip radius: 2µm4mN stylus tip (cone): Tip taper angle: 90°, Tip radius: 5µmPower specication100 - 120V AC ±10%, 50/60HzPower consumption100 VA70 VA140 VAExternal dimensions(W×D×H)Main unit425×94×160mm716×450×863mm766×482×966mm766×482×1166mm1166×482×1176mmCalculation display unit330×270×94mmMotorized unit̶̶372×245×71.8mmMassMain unit2.7kg140kg150kg220kgCalculation display unit4.0kgMotorized unit̶̶3.0kgNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.*1: When using the optional simplied stand: 0.4µm/50mm, When using the optional manual column stand: 0.3µm/50mm*2: Except for SJ-500Note: Stand for SJ-500 is optional. Refer to page L-15 for details.Surftest SJ-500/SV-2100SERIES 178 — Dedicated Control Unit Type Surface Roughness TesterHigh precision and high performance type surface roughness tester with a dedicated control unit, achieving user-friendly display and simple operation.• Equipped with a 7.5-inch, color TFT LCD, large color icons and touch panel controls, the display unit is easy to read and simple to operate.• A built-in joystick on the control unit allows quick and easy positioning. The manual adjustment knob allows fine positioning of a small stylus for measuring small holes.• In addition to the roughness parameters compliant with ISO/JIS/ANSI/VDA surface roughness standard, contour analysis is also available.SJ-500SV-2100M4SV-2100S4Consumables for SV-2100 series/SJ-500 • Printer paper: Standard type (x5 packs): No.270732 • Printer paper: High-durability type (x5 packs): No.12AAA876An inspection certicate is supplied as standard. Refer to page X for details.


page 583