MEASURING INSTRUMENTS CATALOG No.E2016
580/682

L-5LSurftestPerforms brilliantly in many situations such as in the quality control room, on the factory oor and on the production line. Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.ф9 2.416.4Stylus64.83.51.559.56160°1.460.112.60.90.6StylusR40ф2.40.41.8ф9 ф9 3.5ф3.8 4.81.516.260.7Stylusф9 1.8 0.4 ф2.41.60.812.860.3Stylusф9 1013.64.81.523.516.461Stylus9Support feet setNo.12AAA216Detector sideNosepiece for at surfacesNo.12AAA217Nosepiece for cylindrical surfacesNo.12AAA218Optional Accessories for Surftest SJ-210/310• Deep groove detectors• Gear-tooth surface detectorsUnit: mmNo.12AAA217* Standard accessory for the standard/retractable drive unit of the SJ-310 series* Not available for the transverse tracing drive unit• Nosepiece for flat surfaces• Extension cable (1m) (Note: Only one rod can be used.)No.12BAA303* For the connection between the calculation display unit and drive unit• Support feet setNo.12AAA216* Standard accessory for the standard/retractable drive unit of the SJ-310 series* Not available for the transverse tracing drive unit*Adjustment range is 28mm from bottom face.• Height gage adapterNote: Dedicated to the height gage whose scriber mounting dimensions are 9 ×9 mmNo.12AAA222• Nosepiece for cylindrical surfacesNo.12AAA218* Standard accessory for the standard/retractable drive unit of the SJ-310 series* Not available for the transverse tracing drive unitMagnetic stand adapterNo.12AAA221Height gage adapterNo.12AAA222• Point-contact adapterNo.12AAE643* Transverse tracing type standard accessory.* Dedicated to the transverse tracing drive unit.DetectorOptional Accessories for Drive Units72mm7.7mm• V-type adapterNo.12AAE644* Transverse tracing type standard accessory.* Dedicated to the transverse tracing drive unit.• Adapter for flat surfaceNo.12AAA219* Not available for the transverse tracing drive unitAdapter for at surfaceNo.12AAA219Extension rod 50 mm No.12AAA210No.12AAA210 * Not available for the transverse tracing drive unit• Extension rod (50mm) (Note: Only one rod can be used.)• Standard detectors• Small hole detectors• Extra small hole detectors• Magnetic stand adapterNo.12AAA221( Shaft diameter of the mounting section: ø8mm)No.12AAA220( Shaft diameter of the mounting section: ø9.5mm)Code No.Measuring forceStylus proles*Remarks178-2960.75mN2µmR/60˚Dedicated to the standard/retractable drive unit178-3904mN5µmR/90˚178-3870.75mN2µmR/60˚Dedicated to the transverse tracing drive unit178-3864mN5µmR/90˚178-3914mN10µmR/90˚Dedicated to the standard/retractable drive unit*Tip radius / Tip anglesCode No.Measuring forceStylus proles*Remarks178-3830.75mN2 µmR/60˚Minimum measurable hole diameter: ø4.5mm178-3924mN5 µmR/90˚*Tip radius / Tip anglesCode No.Measuring forceStylus proles*Remarks178-3850.75mN2 µmR/60˚Not available for the transverse tracing drive unit178-3944mN5 µmR/90˚*Tip radius / Tip anglesCode No.Measuring forceStylus proles*178-3880.75mN2 µmR/60˚178-3984mN5 µmR/60˚*Tip radius / Tip anglesCode No.Measuring forceStylus proles*Remarks178-3840.75mN2 µmR/60˚Minimum measurable hole diameter: ø2.8mm178-3934mN5 µmR/90˚*Tip radius / Tip angles*Not applicable to upward measurement.

元のページ 

page 580

※このページを正しく表示するにはFlashPlayer10.2以上が必要です