MEASURING INSTRUMENTS CATALOG No.E2016
J-5JProle ProjectorsFor efcient measurement, inspection and observation of very small workpieces Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.PV-5110SERIES 304 — Profile Projectors•Floor-standing model uses overhead illumination.•Conveniently positioned screen (height: 960mm, inclination angle: 32° from the horizontal) allows measurement and observation with ease.•Digital display of protractor screen and LED illumination display of screen index line are both easy to read.•When using a 5X projection lens, a 100mm eld of view is available without moving the workpiece.PV-5110SPECIFICATIONSModel No.PV-5110Order No. 304-919*1Projected imageInverted-reversedProtractor screenEffective diameterø508mm (20”)Screen materialFine-ground glassScreen rotation±360° (±370° for display)Angle displayDigital counter (LED) (ABS/INC mode switching, Zero Set)Resolution1’ or 0.01° (switchable)MechanismFine feed and clampCross-hairs90° (solid lines)Zero-base index(Equipped with the built-in backlight)Projection lensMagnication10X (standard accessory), 5X, 20X, 50X, 100XLens mountQuick insertion typeMagnication accuracyTransmitted illuminationLess than ±0.1% of nominal magnicationSurface illuminationLess than ±0.15% of nominal magnicationIlluminationTransmitted illuminationHalogen bulb (24V, 150W, 500hours) (No.512305)Telecentric system, Heat-absorbing lter, Built-in cooling fan2-step (High/Low) brightness switch, Combination use with a color lter availableSurface illuminationHalogen bulb (24V, 150W, 500hours) (No.512305)Heat-absorbing lter, Beam concentration and adjustment available, Double-lighting oblique surface illumination unit (5X, 10X, 20X),Built-in cooling fan, 2-step (High/Low) brightness switchResolution for X/Y counter *2—Measuring unitDigital scaleMeasuring range (X×Y)200×100mm (164×68mm*3)*1: To denote your AC power cable add the following sufxes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, C and No sufx are required for PSE.*2: X and Y counters are not built into the PV-5110 main unit. If a counter display is required, it is recommended that a QM-Data200 or KA-212 is purchased separately.*3: When using 5X lens under transmitted illumination the view will be partially obscured. Refer to the Measuring Projector (Catalog No.E14005) for more details.