MEASURING INSTRUMENTS CATALOG No.E2016
486/682

G-55GLaser Scan MicrometerNon-contact, high-speed, high-precision measurementMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.XY Measurement (X–Y): atness (X+Y)/2: average * XY requires 10mm-interval.Parallel MeasurementSERIES 544 Laser Scan Micrometer (Display Unit)Optional Accessories•2-channel Digimatic code output•In simultaneous measurement, measurement data are output as follows: Program No.0 to No.4 in OUTPUT-1 Program No.5 to No.9 in OUTPUT-2 (10 programs operated)•10 pin MIL type connector.•Output cable is not supplied. Connecting cable (optional) 1m (936937)•Available for 544-071, 544-072, 544-495, 544-496.* Output is 6 digits of measurement data.* Displaying 6th and 7th digit after the decimal point is not supported.Digimatic code output unit•Enables second unit connection to the 544-071, 544-072. (both units must be the same model)* Cannot be used for 544-495, 544-496.•Depending on the layout of the two measuring units, large-diameter measurement, XY measurement, and parallel measurement are possible.•Both of the measuring units and display units can be simultaneously operated.120±1047.8200±10Dual connection unit•I/O, analog output.•Simultaneous measurement is supported by two pairs of GO/NG judgment outputs. •Available for 544-071, 544-072, 544-495, 544-496.2nd I/O analog I/FXY•Both BCD (02AGC910) and 2nd I/O analog I/F (02AGC880) can be mounted on 544-071, 544-072, 544-495, 544-496 using this cable. * If using this cable, the dual connection unit (02AGP150) cannot be used.Cable for BCD and 2nd I/O simultaneous mountSPECIFICATIONSOrder No.02AGC840SPECIFICATIONSOrder No.02AGP150SPECIFICATIONSOrder No.02AGC880Standard AccessoriesConnector (DDK) 57-30360 (214188)SPECIFICATIONSOrder No.02AGE060Unit: mmDIMENSIONS

元のページ 

page 486

※このページを正しく表示するにはFlashPlayer10.2以上が必要です