MEASURING INSTRUMENTS CATALOG No.E2016
G-50GMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.SERIES 544 Laser Scan Micrometer (Panel-mount Type Display Unit)LSM-5200•A compact controller which could be used for multi-unit system congurations.• Capable of simple connection to a PC via USB. •A Panel-mount type display unit designed for the LSM-S series.•Analog I/O and RS-232C is standard.•Measurement of odd uted parts, and simultaneous measurement / 2-program function are equipped.1380+172144140.468138 (Aluminum case)197.1(20.5)Front viewRear view68+0.70Dimensions of panel mounting slot (DIN 43 700-144×76)Panel thickness: 1.6mm to 6mmMass: 1.4kgSupport for mounting plateBottom viewPanel thickness: 1.6mm to 6mm*240.3 + (t－0.6)(4.4)(Aluminum case)Side viewRefer to the Laser Scan Micrometer (Catalog No. E13004) for more details.Unit: mmDIMENSIONSSPECIFICATIONSOrder No.544-047Display9 digits plus 8 digits LED, guide message LEDSegment1 to 7 (1 to 3, transparent) or 1 to 255 edges*1Averaging methodArithmetic average: from 4 to 2048; Moving average: from 32 to 2048(Arithmetic average is from 16 to 2048 when using LSM-500S.)JudgmentSelecting from "target value ± tolerance value" or "lower limit/upper limit".Measurement modeStandby, Single measurement, Continuous measurementStatistical analysisCalculation result is output via USB or RS-232C.External dimensions144 (W)×72 (H)×197.1 (D)mmPower supply*324V DC±10%, 1.3A or moreStandard I/FUSB2.0, RS-232C, I/O analogOperating environment0 to 40°C, RH 35 to 85% (no condensation)Preservation environments−20 to 70°C, RH 35 to 85% (no condensation)OthersMeasurement of odd fluted parts, simultaneous measurement, nominal setting, sample setting, selection of unnecessary digits, transparent object measurement*2Automatic workpiece detection (dimension/position detected)*1, abnormal data elimination, mastering, statistical processing (when using USB, RS-232C), output timer, automatic measurement in edge mode, presettingNote that every function is limited in its combination possibilities. See the user manual for details.Mass1.4 kg*1: The measuring range will be 0.1mm to 2mm in the 1 to 255 edge measurement mode or when activating the automatic workpiece detection with 544-531, 544-532. Each function has its combination limit.*2: The measuring range is 50μm to 2mm when using 544-531, 544-532. For smaller ranges, contact your local Mitutoyo sales office.*3: DC24V external power supply (commercial item) is required separately.Note 1: Cannot be connected to 544-495, 544-496.Note 2: Previous models such as 544-451 cannot be connected.Note 3: For USB communication with a PC, a dedicated device driver is required. For details, contact your local Mitutoyo sales office.