G-49GLaser Scan MicrometerNon-contact, high-speed, high-precision measurementMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Cable spaceキーロックCALオフセット統計処理同時測定BUSYRUN+NGGO-NGLD2 ONLD1 ON0+/-123654789L.CALH.CAL読込みシフト測定設定C合否判定基準値入力単位葦字統計処理PROG.SW.FOOTI/O ANALOGRS-232CREMOTE INTERLOCKSCAN SIG.-1TRANSMITTER-1ID ROM 1A1A6B1B6DI3358012513134281.412113.525012°•2-axis display unit enables s2 items be displayed simultaneously.•Capable of statistical analysis such as: average, maximum value, minimum value, range (max. - min.).•Segment measurement (7 points) or edge measurement (1 to 255 edge) can be selected.•A function to eliminate abnormal values is standard.•100 tolerance values, preset values, or settings can be stored.SERIES 544 Laser Scan Micrometer (Multifunctional Display Unit)LSM-6200Refer to the Laser Scan Micrometer (Catalog No. E13004) for more details.SPECIFICATIONSOrder No.544-071*544-072*Typemminch/mmDisplay16-digit plus 11-digit fluorescent display, and guide message LEDSegment1 to 7 (1 to 3, transparent) or 1 to 255 edges*1Averaging timesArithmetic average: per 2 to 2048/ Moving average: per 32 to 2048 (Arithmetic average is per 16 to 2048 when using 544-531, 544-532)JudgmentSelection from "target value + tolerance", "lower tolerance + upper tolerance", or "7 classes multi-limit tolerance zone".Measurement modeStandby, Single measurement, Continuous measurementStatistical analysisMaximum, Minimum, Average, Dispersion, (S.D)Size335 (W)×134 (H)×250 (D)mmPower supply100 - 240 V AC ±10%, 40VA, 50/60HzStandard I/FRS-232C, Analog I/OOptional I/FDigimatic code output unit (2-ch), 2nd I/O analog I/F, BCD I/FOperating environment0 to +40°C, RH 35 to 85% (no condensation)OthersNominal setting, sample setting, selection of unnecessary digits, transparent object measurement*2, measurement of odd fluted parts, automatic measurement in edge mode, output timer, abnormal data elimination, SHL change, group judgment, simultaneous measurement, statistical processing, mastering, buzzer function, automatic workpiece detection (dimension/position)*1, zero-set/offset, dual measurement (optional)*1: The measuring range will be 0.1mm to 2mm in the 1 to 255 edge measurement mode or when activating the automatic workpiece detection with 544-531, 544-532. Each function has its combination limit.*2: The measuring range is 50μm to 2mm when using 544-531, 544-532. For smaller range, contact your local Mitutoyo sales office.* To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, F for SAA, K for KC, C and No suffix are required for PSE.** Cannot be connected to 544-495, 544-496.** Previous models such as 544-451 cannot be connected.Unit: mmDIMENSIONS


page 480