MEASURING INSTRUMENTS CATALOG No.E2016
G-42GMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Cable spaceMeasuring range(Measuring position)M3, depth 6 (×4)ø3.1, depth 6551261812134324610370min2532.5844015.510.517.51111Working distance40SERIES 544 Laser Scan Micrometer (Measuring Unit)LSM-500S•Capable of measuring down to 5μm outside diameter*1.•Provides ultra-high accuracy of ±0.3μm over the entire measuring range (5μm to 2mm).•Ultra-high speed measurement of 3200 scan/sec.Suitable for high speed lines or in applications subject to vibration.Optional Accessories• Multifunctional display unit, LSM-6200: • Easy-to-operate display unit, LSM-5200:• Standard calibration gage set (ø0.1, ø2.0) : 02AGD110• Guide pulley: 02AGD200• Air blower: 02AGD220Unit: mmDIMENSIONSRefer to the Laser Scan Micrometer (Catalog No. E13004) for more details.Order No.Cable length02AGN780A5m02AGN780B10m02AGN780C15mOrder No.Remarks544-046Japanese user's manual544-047English user's manualOrder No.Display typeRemarks544-071Japanese mm/EJapanese user's manual544-071*English mm/EEnglish user's manual544-072*English mm/inch* To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, F for SAA, K for KC, C and No suffix are required for PSE."SPECIFICATIONSOrder No.544-531544-532Applicable laser standardsJISIEC, FDAUser's ManualJapanese versionEnglish versionMeasuring range0.005 to 2mm*1Resolution0.01 to 10μm (selectable)Repeatability*2±0.03μmAccuracy (20°C)*3±0.3μmPositional error*4±0.4μmMeasuring range*51×2mm (0.005 to 2mm)Scanning rate3200 scans/sLaser wavelength650nm (Visible)Laser scanning speed76m/sOperating environmentTemperature0 to 40°CHumidityRH 35 to 85% (no condensation)Protection LevelIP64*6*1: The measuring range for the transparent object will be 0.05mm to 2mm. Please consult your local Mitutoyo office for objects smaller than 0.05mm. The measuring range will be 0.1mm to 2mm in the 1 to 255 edge measurement mode or when activating the automatic workpiece detection. If using the optional dual connection unit for LSM-6200, the measuring range will be 0.05mm to 2mm.*2: Determined by the value of ±2 (: standard deviation) when measuring ø2mm at the interval of 0.32 sec. (average 1024 times).*3: Center of the measuring range for cylindrical workpieces outside diameter.*4: An error of the outside diameter due to variation in workpiece position either in the optical axis direction or in the scanning direction.*5: The area given by [optical axis direction]×[scanning direction].*6: If the workpiece or glass of the measuring unit window is soiled by water or dust, the unit may malfunction.Note: When using extra-fine line measurement function (FINE), guide messages for setting the following will not be displayed: dual-measurement, segment designation, automatic workpiece detection, and group judgment. Laser safetyMitutoyo Laser Scan Micrometers use a low-power visible laser for measurement. The laser is a CLASS 2 EN/IEC60825-1 (2007) device. Warning and explanation labels, as shown right, are attached to the Laser Scan Micrometers as is appropriate.