G-24GMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.INDC ININPUTAI/ORS-232COUTRS LINKBCode No. 542-***Model EH-12SSerial No. 000001MADE IN JAPAN2711.21375.1137156.714472(3.1)68138148.2Indicates AC adapter installation(Approx 10°)DC12-24VRS LINKINOUTRS-232CI/O700mADC INCode No.ModelSerial No.MADE IN JAPAN********************Kawasaki, JapanINPUTAB*******Kawasaki, JapanCode No.ModelSerial No.MADE IN JAPAN*************DC12-24VRS LINKINOUTRS-232CI/O700mADC INBAINPUT*******Kawasaki, JapanCode No.ModelSerial No.MADE IN JAPAN*************DC12-24VRS LINKINOUTRS-232CI/O700mADC INDC IN700mAI/ORS-232COUTINRS LINKDC12-24V*******Kawasaki, JapanCode No.ModelSerial No.MADE IN JAPAN*************BAINPUTCode No.ModelSerial No.MADE IN JAPAN********************Kawasaki, JapanDC12-24VRS LINKINOUTRS-232CI/O700mADC IN6813868138681386813868138SERIES 542 Linear Gage CounterEH Counter (Panel-mount, Multi-function Type)•Two types are available for this model: a 1-axis display and a 2-axis display, which enables addition or subtraction calculations between two gages.•Multifunctional counter equipped with zero-setting, presetting, tolerance judgment.•RS-232C and USB are equipped as standard. Data transfer to a PC is possible. (*USB is supported only by Mitutoyo SENSORPAK.)•A multi-point (max. 20 points) measuring system can easily be congured with the built-in RS Link networking function. Refer to "Quick Guide to Precision Measuring Instruments" on page G-32 for details of the RS link.•Employs DIN size (144x72mm) and mount-on-panel conguration to facilitate system integration.Optional Accessories• I/O output connector (with cover): 02ADB440Unit: mmDIMENSIONS542-075542-071542-073542-074542-072SPECIFICATIONSOrder No.542-075*542-071*542-073*542-074*542-072*Number of axes to be displayed1 axis2 axesQuantizing error±1 countMaximum input frequency2.5MHz (2-phase square wave) 1MHz (2-phase sine wave) —Resolution( ) indicates maximum display range0.01mm (±9999.99mm) / .0005" (±99.9995")0.001mm (±999.999mm) / .00005" (±9.99995")0.0001mm (±99.9999mm) / .000005" (±.999995") [Parameter set]Automatic setting by gage —0.01 / 0.001μmDisplaySign plus 8 digits (Green LED)Tolerance judgment displayLED display (3 steps: Amber, Green, Red/ 5 steps: Amber, Amber flashing, Green, Red flashing, Red)InterfaceRS-232C/USB/parameter selection via digimatic (only DP-1VR, digimatic mini-processor can be connected)(USB used only with SENSORPAK.)Selection by parameter from 3-step, 5-step, or digit BCD Total tolerance judgment output (when tolerance function is enabled)Analog output (1V-4V)Input/outputControl outputNormal operation signal (NOM): open-collectorControl inputDisplay BANK switching, peak mode, presetting, display hold, hold per axis: open-collector or no-voltage contact signal (with/without contact point)RatingPower supply voltageSupplied AC adapter, or 12 - 24V DCPower consumption8.4W (max. 700mA)Ensure at least 1A is available per unit.Operating temperature (humidity) range0 to 40°C (RH 20 to 80%, no condensation)Storage temperature(humidity) range–10 to 50°C (RH 20 to 80%, no condensation)External dimensions144 (W) ×72 (H) ×156.7 (D) mmAC adpter / AC cableAC adapter: 02ADN460 / AC cable: 02ZAA000, AC cable (Japan): 02ZAA000*, AC cable (USA): 02ZAA010*, AC cable (EU): 02ZAA020*, AC cable (Britain): 02ZAA030*, AC cable (China): 02ZAA040*, AC cable (Korea): 02ZAA050*Applicable gage headLGE, LGF, LGK, LGB, LGM, LG, LGH (LGH-110 excluded)Models with reference point mark, sine wave output type are excluded.LGF with reference point markLGB sine wave output / Linear scale sine wave outputLGD, LGS, ID, SDApplicable inputDifferential square-waveDifferential sine-waveDigimatic code outputNumber of gage inputs12MassApprox. 760gApprox. 800gApprox. 800gApprox. 900gApprox. 800g* To denote your AC power cable add the following suffixes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, C and No suffix are required for PSE.For those models of the Order No. with Suffix "1", AC adapter is not attached as a standard accessory.


page 455