MEASURING INSTRUMENTS CATALOG No.E2016
445/682

G-14GMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.575-326, 575-326-3/5/7575-328, 575-328-3/5/7575-327, 575-327-3/5/7LGD®-1025L-B, -1025L/3-B, -1025L/5-B, -1025L/7-BDimensions with a thrust stem installedCable length =2, 3, 5, 7m(screw top height)02ADB681Thrust stem02ADB682Clamp nutM9.5×0.5Attachment thread for thrust stemM9.5×0.546.961.515.4(129.5)3410.6 or longer (stroke)12.3ø8-0.009 017.320378.669.514.54ø9.5-0.015 0(13.8)12545.975.7146.914.80.6Rubber bootAttachment thread for thrust stemM14×0.5(screw top height)Cable length =2, 3, 5, 7m26 or longer (stroke)02ADB69202ADN371Clamp nutThrust stemM18×1Dimensions with a thrust stem installed18.595ø18-0.018 0(24.2)2193.68.634(208.3)13.8ø15-0.015 020378.661.730.720.64.584.1200.6114.76.522Rubber bootDimensions with a thrust stem installed(screw top height)Cable length =2, 3, 5, 7m51.5 or longer (stroke)M14×0.5Attachment thread for thrust stemM18×1Thrust stemClamp nut02ADN37102ADB69218.595ø18-0.018 0(24.2)211423413.8(316)0.6ø15-0.015 037208.661.720.656.18.64.5124.9174629.620Rubber bootRefer to the Linear Gage (Catalog No.E13007) for more details.InchOrder No.*1575-336, 575-336-3/5/7575-337, 575-337-3/5/7575-338, 575-338-3/5/7Measuring range.4”1”2”Resolution.0005”Measuring accuracy (20°C).001”.0012”Quantizing error±1 countMeasuring force Contact point downwards1.2N or less4.6N or less5.7N or lessContact point horizontal1.1N or less4.3N or less5.3N or lessContact point upwards1.0N or less4.0N or less4.9N or lessPosition detection methodABSOLUTE electrostatic capacitance type linear encoderResponse speedUnlimited (not applicable to scanning measurement)OutputDigimatic outputExternal inputReference-setting signal (Absolute reference position*2 can be changed externally.)Mass*3Approx. 260gApprox. 300gApprox. 400gContact pointø3mm carbide-tipped (fixing screw: M2.5 (P=0.45)×5), standard contact point: 901312Stem dia.ø8ø15Bearing typeLinear ball bearingDust/water resistance*4Equivalent to IP66 (only gage head)Output cable length (directly extended from the main unit)2m, 3m, 5m, 7mOperating temperature (humidity) range0 to 40°C (RH 20 to 80%, no condensation)Storage temperature(humidity) range–10 to 60°C (RH 20 to 80%, no condensation)Standard AccessoriesWrench for contact point: 538610Wrench for contact point: 210187*1: The last number of the Code No. represents special cable length. (meters)*2: The absolute reference point is near the lowest rest point at shipment.*3: Mass including 2m cable. *4: IP Code is a standard which classifies and rates the degree of protection provided against the intrusion of solid objects and water. This may not be applicable depending on the kind of liquid.Unit: mmDIMENSIONS*With thrust stem set (optional accessory) *With thrust stem set (optional accessory) *With thrust stem set (optional accessory)

元のページ 

page 445

※このページを正しく表示するにはFlashPlayer10.2以上が必要です