MEASURING INSTRUMENTS CATALOG No.E2016
444/682

G-13GLinear GageIdeal for integration into harsh environments such as automation applicationsMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.SERIES 575 — ABSOLUTE / Standard TypeLGD•Absolute position detection makes it possible to maintain the reference point even when the power is switched off.•Excellent protection against dust and splashing water (IP66) in the factory oor.•The spindle guide uses high precision linear ball bearings for extremely smooth movement and exceptional durability.•Sliding durability improved to remain serviceable for at least 15 million cycles (in-house testing).•Shock resistance, 100g/11ms (IEC 60068-2-27)Connector378.620Unit: mmOptional Accessories• Air drive unitFor 10mm range models: 02ADE230For 25mm range models: 02ADE250For 50mm range models: 02ADE270* Required air pressure: 0.2 to 0.4MPa* Spindle extends when air is supplied.• Rubber boot (spare)For 10mm range models: 238772For 25mm range models: 962504For 50mm range models: 962505• Thrust stem setFor 10mm range models: 02ADB680Thrust stem: 02ADB681 Clamp nut: 02ADB682For 25/50mm range models: 02ADN370Thrust stem: 02ADN371 Clamp nut: 02ADB692* External dimensions are described in the dimensional drawing of the product.* Thrust stem set is a combination of thrust stem and a clamp nut. A special spanner is required for tightening. If using multiple gages, a thrust stem set for each gage and one special spanner are required.• Special spannerFor 10mm range models: 02ADB683For 25/50mm range models: 02ADB693Digimatic Power Supply Unit: 965275** To denote your AC line voltage add the following suf-xes to the order No. (e.g.: 965275A): A for UL/CSA, D for CEE, E for BS, F for SAA, DC for China, K for KC, No sufx is required for JIS/100VRefer to the Linear Gage (Catalog No.E13007) for more details.575-326, 575-326-3/5/7575-327, 575-327-3/5/7575-328, 575-328-3/5/7SPECIFICATIONSMetricOrder No.*1575-326, 575-326-3/5/7575-327, 575-327-3/5/7575-328, 575-328-3/5/7Measuring range10mm25mm50mmResolution10μmMeasuring accuracy (20°C)20μm30μmQuantizing error±1 countMeasuring force Contact point downwards1.2N or less4.6N or less5.7N or lessContact point horizontal1.1N or less4.3N or less5.3N or lessContact point upwards1.0N or less4.0N or less4.9N or lessPosition detection methodABSOLUTE electrostatic capacitance type linear encoderResponse speedUnlimited (not applicable to scanning measurement)OutputDigimatic outputExternal inputReference-setting signal (Absolute reference position*2 can be changed externally.)Mass*3Approx. 260gApprox. 300gApprox. 400gContact pointø3mm carbide-tipped (fixing screw: M2.5 (P=0.45)×5), standard contact point: 901312Stem dia.ø8ø15Bearing typeLinear ball bearingDust/water resistance*4Equivalent to IP66 (only gage head)Output cable length (directly extended from the main unit)2m, 3m, 5m, 7mOperating temperature (humidity) range0 to 40°C (RH 20 to 80%, no condensation)Storage temperature(humidity) range–10 to 60°C (RH 20 to 80%, no condensation)Standard AccessoriesWrench for contact point: 538610Wrench for contact point: 210187*1: The last number of the Code No. represents special cable length. (meters)*2: The absolute reference point is near the lowest rest point at shipment.*3: Mass including 2m cable. *4: IP Code is a standard which classifies and rates the degree of protection provided against the intrusion of solid objects and water. This may not be applicable depending on the kind of liquid.(Refer to page X for details.)

元のページ 

page 444

※このページを正しく表示するにはFlashPlayer10.2以上が必要です