MEASURING INSTRUMENTS CATALOG No.E2016
440/682

G-9GLinear GageIdeal for integration into harsh environments such as automation applicationsMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.ConnectorExample of slim head low measuring force (made to order)• Low measuring force, suitable for measurement of soft-material workpieces (Consult us for other measuring forces).SERIES 542 — Slim TypeLGB2•Slim design, nut clamp type (Stem dia. is ø9.5mm)•The spindle guide uses high precision linear ball bearings for extremely smooth movement and exceptional durability.542-244542-262/542-262H20.43047100Connecting cable (2m)Dsub 15 pinUnit: mmUnit: mm20.43082.7Connecting cable (2m)(HIROSE)RM12BPE-6PH542-264External dimensions: refer to page G-10.542-270Optional Accessories• Rubber boot (spare)For 5mm range models: 238773For 10mm range models: 238772• Extension cable ( 5m) : 902434*5• Extension cable (10m): 902433*5• Extension cable (20m): 902432*5*5: Not available for sine-wave output type.Refer to the Linear Gage (Catalog No.E13007) for more details.SPECIFICATIONSTypeL-shapedStraightLow measuring forceAir-drivencontact point*1Sine-wave output typeSlim typeOrder No.542-244542-262542-262H542-264542-270*2542-421542-246Measuring range5mm (.2”)10mm (.4”)5mm(.2")Resolution1μm*30.1μmMeasuring accuracy (20°C)2μm1μm2μm0.8μmMaximum response speed900mm/s380mm/sMeasuring forceContact point downwards0.65N or less0.8N or less0.6N or less0.8N or less0.65 or lessContact point horizontal0.6N or less0.75N or less0.55N or less0.75N or less0.6 or lessContact point upwards0.55N or less0.7N or less0.5N or less0.7N or less0.55 or lessProtection Level*4Equivalent to IP54 (only gage head)Mass160g170g170g180g160g*1: Required air pressure: 0.3 to 0.4MPa*2: Spindle extends when air is supplied.*3: Depends on the settings of the connected counter.*4: IP Code is a standard which classifies and rates the degree of protection provided against the intrusion of solid objects and water. This may not be applicable depending on the kind of liquid.Sine wave output models(542-401/21)Depending on the operating method, the spindle forward speed of low mea-suring force model may become slow compared to the standard model. Please check if this restriction is compat-ible with the application. Please contact Mitutoyo to verify the application.ModelL-shaped modelAir-driven contact point modelMeasuring range5μm10μmResolution1μm1μmMeasuring force*Contact point downwards0.5N or less0.6N or lessContact point horizontal0.45N or less0.55N or lessContact point upwards0.4N or less0.5N or less* Measuring force at the retraction of the spindle542-246

元のページ 

page 440

※このページを正しく表示するにはFlashPlayer10.2以上が必要です