MEASURING INSTRUMENTS CATALOG No.E2016
386/682

F-45FMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.ANSI/AGD typeANSI/AGD typeSPECIFICATIONSMetric Series 1Order No.GraduationRange (range/rev)AccuracyRepeat-abilityDial readingMeasuring forcew/ lugFlat-backFirst 1 Rev / 2.5 Rev / 10 RevRetrace1230S-011230SB-010.01mm2.5mm (1mm)±10µm / ±10µm / —3µm±2µm0-1001.4N or less1231S-011231SB-010.01mm2.5mm (1mm)±10µm / ±10µm / —3µm±2µm0-50-01.4N or less1044S-011044SB-010.01mm5mm (1mm)±10µm / ±10µm / ±13µm3µm±3µm±0-1001.4N or less1045S-011045SB-010.01mm5mm (1mm)±10µm / ±10µm / ±13µm3µm±3µm0-50-01.4N or less1010S-111010SB-110.002mm0.5mm (0.2mm)±2µm / ±2µm / —2µm±1µm0-201.5N or less1011S-111011SB-110.002mm0.5mm (0.2mm)±2µm / ±2µm / —2µm±1µm0-10-01.5N or lessMetric Series 2Order No.GraduationRange (range/rev)AccuracyRepeat-abilityDial readingMeasuring forcew/ lugFlat-backFirst 1 Rev / 2.5 Rev / 10 RevRetrace2230S-012230SB-010.01mm2.5mm (1mm)±10µm / ±10µm / —3µm±3µm±0-1001.4N or less2231S-012231SB-010.01mm2.5mm (1mm)±10µm / ±10µm / —3µm±3µm0-50-01.4N or less2046S-012046SB-010.01mm10mm (1mm)±10µm / ±10µm / ±13µm3µm±3µm±0-1001.4N or less2046S-112046SB-110.01mm10mm (1mm)±10µm / ±10µm / ±13µm3µm±3µm±0-1001.4N or less2048S-112048SB-110.01mm10mm (1mm)±10µm / ±10µm / ±13µm3µm±3µm±0-1001.4N or less2047S-012047SB-010.01mm10mm (1mm)±10µm / ±10µm / ±13µm3µm±3µm0-50-01.4N or less2047S-112047SB-110.01mm10mm (1mm)±10µm / ±10µm / ±13µm3µm±3µm0-50-01.4N or less2902S-012902SB-010.01mm10mm (1mm)±10µm / ±10µm / ±13µm3µm±3µm100-01.4N or less2050S-012050SB-010.01mm20mm (1mm)±10µm / ±10µm / ±15µm / ±20µm (20Rev)4µm±3µm±0-1002.0N or less2050S-112050SB-110.01mm20mm (1mm)±10µm / ±10µm / ±15µm / ±20µm (20Rev)4µm±3µm±0-1002.0N or less2056S-012056SB-010.01mm25mm (1mm)±10µm / ±10µm / ±15µm/ ±20µm (20Rev)/ ±25µm (Over 20Rev)4µm±3µm±0-1002.5N or less2900S-73*2900SB-73*0.001mm0.08mm (0.1mm)±2µm / — / —2µm±0.3µm40-0-402.0N or less2109S-112109SB-110.001mm1mm (0.2mm)±3µm / ±3µm / ±4µm2µm±0.3µm0-10-01.5N or less2119S-112119SB-110.001mm5mm (0.2mm)±7µm / ±7µm / ±8µm / ±10µm (20Rev) / ±10µm (Over 20Rev)2.5µm±0.3µm0-10-01.5N or less*1 One revolution typeFEATURESMetricOrder No.63—w/ lugFlat-back1230S-011230SB-01——————1231S-011231SB-01——————1044S-011044SB-01——————1045S-011045SB-01——————1010S-111010SB-11—4——4—1011S-111011SB-11—4——4—MetricOrder No.64w/ lugFlat-back2230S-012230SB-01———————2231S-012231SB-01———————2046S-012046SB-01———————2046S-112046SB-11—4—————2048S-112048SB-11—444———2047S-012047SB-01———————2047S-112047SB-11—4—————2902S-012902SB-01——————42050S-012050SB-01———————2050S-112050SB-11—4—————2056S-012056SB-01———————2900S-73*2900SB-73*—4——44—2109S-112109SB-11—4——4——2119S-112119SB-11—4————Optional Accessories––––––:Backs (See page F-50.)––––––:Contact points (See pages F-46 to F-49.)ANSI/AGD Type Metric Dial Indicatorwith ø3/8" Stem and #4-48UNF-Thread Contact Point Compatible TypeDial IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.An inspection certicate is supplied as standard. Refer to page X for details.* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.*2 Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

元のページ 

page 386

※このページを正しく表示するにはFlashPlayer10.2以上が必要です