MEASURING INSTRUMENTS CATALOG No.E2016
358/682

F-17FMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.ABSOLUTE Digimatic Indicator ID-FSERIES 543 — with Back-light LCD Screen• GO/±NG judgment function: If a judgment result shows an out of tolerance condition, the display backlighting changes from green to red.• An analog bar indicator has been integrated to make upper/lower limit and turnover point reading more comfortable. • With Mitutoyo's ABSOLUTE Linear Encoder technology, once the measurement reference point has been set it will not be lost when the power is turned off. Also, reliability has been increased due to the elimination of over-speed errors. Note: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18.• Easy-to-read large LCD readout with the character height of 8.5mm. • External power supply type: battery change is not necessary. Power can also be supplied via the AC adapter supplied as a standard accessory. • The resolution can be switched between 0.001mm /0.01mm (or .001” /.0005” /.0001” /.00005”).• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. 543-551543-553543-551543-553Multi-functional model 43.311ø19.266ø4.8 M2.5×0.45ø8 0-0.0097.384.857.283.2702619.540.81143.366ø19.285.283.2 ø8 0-0.0097.3ø4.8 M2.5×0.45110.697.319.565.352Digimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.SPECIFICATIONSMetricOrder No.*RangeResolutionAccuracy**543-55125mm0.001mm, 0.01mm0.003mm543-55750mm0.003mm543-55350mm0.006mm* To denote your AC power cable add the following sufxes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, No sufx is required for JIS/100V **Quantizing error of ±1 count is excluded.Inch/MetricOrder No.*RangeResolutionAccuracy**543-5521” / 25.4mm.00005”, .0001”, .0005”, .001”, 0.001mm, 0.01mm.00012” / 0.003mm543-5582” / 50.8mm.00012” / 0.003mm543-5542” / 50.8mm.00024” / 0.006mm* To denote your AC power cable add the following sufxes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, No sufx is required for JIS/100V**Quantizing error of ±1 count is excluded.DIMENSIONSUnit: mmTechnical DataResolution:0.01mm/0.001mm or .00005”/.0001”/.0005”/.001”/0.001mm/0.01mmDisplay:6-digit LCD, sign, and analog bar with 2-color backlightScale type: ABSOLUTE electrostatic linear encoderMax. response speed: UnlimitedMeasuring force:1.8N or less (25.4mm models) 2.3N or less (50.8mm models)Spindle orientation: Between the spindle pointing vertically downward to the spindle horizontalStem dia.: 8mm (ISO/JIS type) or 3/8” (ANSI/AGD type)Power supply: 9V DC (via AC adaptor) 06AEG302Lifting lever: 137693* To denote your AC power cable add the following sufxes to the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, K for KC, No sufx is required for JIS/100VFunctionsPreset, Zeroset, GO/±NG judgment, Max/Min value hold, Runout measurement, Resolution switching, Counting direction switching, Power ON/OFF, Data output, inch/mm conversion (inch/mm models)Alarm:Counting value composition error, Overow error, Tolerance limit setting error Optional Accessories• Lifting cable: No.540774 (stroke 25.4mm)• Auxiliary spindle spring: No.02ACA571 (25.4mm/1” models)* No.02ACA773 (50.8mm/2” models)*• Lug-on-center back: No.101040 (ISO/JIS type) No.101306 (ASME/ANSI/AGD type)* Required when orienting the indicator upside down.• SPC cable: No.936937 (1m) No.965014 (2m)• USB Input Tool Direct (2m) : No.06ADV380F• Connecting Cables for U-WAVE-T (160mm) : No.02AZD790D For footswitch: No.02AZE140D Refer to page F-60 for details.• Digimatic Mini-Processor DP-1VR: 264-504• Contact points for Mitutoyo’s dial indicators *4• Interchangeable backs for Series 2 models*5• Measuring stands * 4 Refer to pages F-46 to F-49 for details. * 5 Refer to page F-50 for details.ApplicationDifference/Runout measurementExample: Indicator travel from points A to DDifference (or Total Runout) is displayed as A. Dimensions B (maximum value) and C (minimum value) can be recalled from memory with a simple key sequence.ABCPoint APoint CPoint BPoint DGreen indication for GO judgmentRed indication for ±NG judgmentNote 1:Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.Note 2:Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.ISO/JIS Type(Refer to page X for details.)ISO/JIS typeASME/ANSI/AGD type

元のページ 

page 358

※このページを正しく表示するにはFlashPlayer10.2以上が必要です