F-10FMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.• Dedicated to inside measurement with minimum-value Hold and tolerance judgement functions.• Measurement data memory function (9 measurement results can be stored)• Simple operation of many functions with ve buttons and status icons.• Wide LCD and new analog bar graph are now standard on all models.• Sampling is performed fty times per second for accurate detection of maximum and minimum values.ABSOLUTE Digimatic Indicator ID-CSERIES 543 — Bore Gage TypeOptional Accessories• SPC Cable: No.905338 (1m) No.905409 (2m)• USB Input Tool Direct (2m) : No.06ADV380F• Connecting Cables for U-WAVE-T (160mm) : No.02AZD790F For footswitch : No.02AZE140F Refer to page F-60 for details.• Digimatic Mini-Processor DP-1VR: 264-504• Parameter setup kit : No.21EZA313Note: Parameter setting software (can be downloaded freely from Mitutoyo website) is also required.*1 Does not include quantizing error (±1 count). Valid for resolution set to 0.001mm/.00005"*2 Applies only if not connected to a data processor. Battery life depends on use of the indicator. Use the above value as a guide only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 4.5 months.Notes: 1) Min. hold: sample rate is 50 readings/sec; maximum trackable rate of change is 50μm/sec.2) All instruments in this series are of the at back type.3) All instruments in this series can be only used for inside diameter measurement. DIMENSIONSUnit: mmFunctionsMinimum value detection functionPreset function (3 Preset values can be stored)Tolerance judgement function (3 sets of upper and lower limits can be stored)Resolution selection functionAnalog bar resolution selection functionKey lock functionin/mm conversion (when external device is connected)Display hold function (when external device is connected)Data saving/calling function (when external device is connected)Data output functionExternal PC setting input functionDisplay rotation functionLow battery/voltage alarm displayError alarm displayABSOLUTE Digimatic Bore Gages, which integrate the display with a bore gage measuring unit, are also available. Refer to pages C-41 and C-42 for details.The ABSOLUTE Digimatic Bore GageSPECIFICATIONSMetricOrder No.*RangeResolutionAccuracy*1Hysteresis*1Repeatability*1Power supplyBattery life (normal use)*2Net weight543-310B12.7mm0.001/0.01mm0.003mm0.002 mm0.002 mmCR2032 x 1 pc.Approx. 1 year170 g*Flat back onlyInch/MetricOrder No.*RangeResolutionAccuracy*1Hysteresis*1Repeatability*1Power supplyBattery life (normal use)*2Net weight543-311B.5"/12.7mm.00005/.0001/.0005"/ 0.001/0.01 mm±.00010" / 0.003 mm.00010" / 0.002 mm.00010" / 0.002 mmCR2032 x 1 pc.Approx. 1 year170 g543-312B*Flat back onlyNote 1:Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.Note 2:Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.ISO/JIS Type(Refer to page X for details.)543-312Bø10.9ø8 0 -0.00950.146.516.821.27.354.413.3ø59.428.6ø4.87.6ø54Contact pointM2.5 x 0.45An inspection certicate is supplied as standard. Refer to page X for details.ISO/JIS typeASME/ANSI/AGD type


page 351